////////// ADIOLAB OMNIA General Description Integrated Amplifier
Design Philosophy and Core Technology 2x50W (8ohm) / 2x75W (4ohm) Class AB
ES9038Q2M 32-bit DAC
- 4.3" (80x48mm) large size full view IPS LCD
Built in certified hardware MQA Full decoder (PC USB, Coax/Optical)
CD playback compatible with CD, CD-R, CD-RW discs
USB memory device support (MP3/WMA/AAC/WAV)
DTS Play-Fi technology (IEEE 802.11 a/b/g/n/ac)
Streaming service support includes Amazon Music, Spotify, TIDAL, KKBox, SiriusXM, Napster, Internet Radio, Deezer, iHeartRadio, PANDORA, Qobuz, QQmusic and more
Multi-room / multi speaker group support
Bluetooth 5.0 (aptX/aptX LL) streaming
Low Noise Moving Magnet Phono stage
Dedicated Current-Feedback Headphone AMP
Integrated / PRE-POWER / PRE only Modes
Android / iOS / Kindle Fire / Windows PC Control Support
USB firmware upgrade input
Inputs 3 x Analogue, 1 x Phono (MM) , 1 x Power Amplifier, 2 x SPDIF (Coax),
2 x SPDIF (Optical), 1 x DTS Play-Fi Streaming, 1xPC USB(USB B),
1xUSB HDD(USB A), 1 x Bluetooth(aptX/aptX LL), 1 x 12V Trigger
Outputs 1 x PRE Amplifier, 1 x Stereo Speaker, 1 x Headphone, 1 x 12V Trigger
Sampling Frequency Optical / Coaxial:44.1kHz ---192kHz
Optical / Coaxial: 44.1kHz ---192kHz
PC USB: 44.1kHz - 768kHz (PCM) / DSD64, DSD128, DSD256, DSD512
Preamplifier Section
Gain +8dB (Line)
+47dB (Phono MM)
Input Sensitivity 720mV (Line, Volume = 0dB)
3.1mV (Phone MM, Volume=0dB)
Input Impedance 10K (Line)
47K // 100pF (Phono MM)
Total Harmonic Distortion (THD) < 0.0004% (1KHz @ 2V, Volume = 0dB)
Frequency Response 20Hz-20kHz (+/-0.1dB)
Output Voltage 2.3V max. (Volume = 0dB)
Output Impedance 100 ohm
Signal-to-Noise Ratio >110dB (Line,A-weighted)
76dB (Phono MM,A-weighted)
DAC
D to A Converte ES9038Q2M
Total Harmonic Distortion (THD) < 0.0006% (1KHz @ 0dBFS)
Output level (0dBFS, 1KHz) 2.1Vrms
Max. Sampling Frequency Optical, Coaxial: 192KHz
Ethernet,Wi-Fi: 192KHz
USB A：48kHz
PC USB: PCM768kHz, DSD512
Signal-to-noise Ratio (S/N) 114dB (A-weighted)
Power Amplifier Section
Gain +29dB
Rated Power Output 2 x 50W (8 ohm, THD < 1%)
2 x 75W (4 ohm, THD < 1%)
Frequency Response 20Hz-20kHz (+/-0.3dB)
Total Harmonic Distortion (THD) < 0.003% (1kHz @ 40W / 8ohm)
Input Sensitivity 720mV
Signal-to-Noise Ratio (S/N) 110dB (A - weighted)
Max. Output Current 9A
Headphone Amplifier
Total Harmonic Distortion (THD) < 0.01% (1kHz, 50mW )
Output Impedance 10ohm
Load impedance 20-600 ohm
General
Standby Power Consumption < 0.5W
Net Weight 9.1kg
Gross Weight 11kg
Dimensions (mm) (W x H x D) 440 x156 x 327
Carton Size (mm) (W x H x D) 540 x 412 x 210
Finish Black / Silver
Power Requirements (depending on region) 220-240V ~ 50/ 60Hz
100-120V ~ 50/ 60Hz
Standard Accessories Power Cord, Remote Control,User Manual, Antennas, etc. //////////////MISSION 700/General Description 2-way vented-box / standmount
Enclosure Type Bass reflex
Transducer Complement 2-way
Bass Driver 6.5" (165mm) mineral loaded polypropylene cone
Treble Driver 1.25" (28mm) soft dome
Sensitivity (2.83V @1m) 86dB
Recommended Amplifier Power 25-150W
Peak SPL 106dB
Nominal Impedance 8Ω
Minimum Impedance 5.2Ω
Frequency Response (+/-3dB) 45Hz ~ 20kHz
Bass Extension (-6dB) 38Hz
Crossover Frequency 3.0kHz
Cabinet Volume (in litres) 24.8L
Height (on plinth) 510mm
Width 260mm
Depth (with terminals) (270+22)mm
Carton Size 680 x 410 x 630mm
Net Weight 12.8kg/pcs
////////STAND Columns High carbon steel with internal damping
Top Plate High carbon steel
Base Frame Interlocked high carbon steel tube
Base Spikes Hardened stainless steel
Dimensions (mm)
Height (on spikes) 485mm
Width 320mm
Depth 330mm
Top Plate (W x D) 260 x 270mm
Carton Size 740 x 410 x 130mm
Net Weight 6.5kg/pcs
Gross Weight 14.6kg/ctn