////////LEAK 230 Specifications
General Description Integrated Amplifier
Design Philosophy and Core Technology · 2 x 75W (8ohm) / 2 x 115W (4ohm) Class AB
· ST MOSFET TDA7293 Dual Parallel Amplifier
· ES9038Q2M 32-bit DAC
· Built-in Certified Hardware MQA Full Decoder (PC USB, Coax, Optical)
· Support Bluetooth 5.0 (aptX / aptX LL) streaming
· Low Noise Moving Magnet Phono stage
· Dedicated Current-Feedback Headphone AMP
· Support USB Upgrade
Inputs 2 x Analogue, 1 x Phono (MM), 1 x SPDIF (Coax), 1 x SPDIF (Optical), 1 x HDMI ARC,
1 x PC USB (USB B), 1 x Bluetooth (aptX/aptX LL), 1 x 12V Trigger
Outputs 1 x PRE Amplifier, 1 x Stereo Speaker, 1 x Headphone, 1 x 12V Trigger
Sampling Frequency Optical/Coaxial: 44.1kHz ---192kHz
PC USB: 44.1kHz-768kHz (PCM) / DSD64, DSD128, DSD256, DSD512
Preamplifier Section
Gain +41dB (Phono MM)
Input Sensitivity 550mV (Line, Volume =MAX)
4.8mV (Phone MM, Volume=MAX)
Input Impedance 10K (Line)
47K // 100pF (Phono MM)
Total Harmonic Distortion (THD) <0.001% (1kHz @2V, TONE=On)
Frequency Response 20Hz-20kHz (+/-0.1dB)
Output Voltage 2.3V max. (Volume = MAX)
Output Impedance 100ohm
Signal-to-Noise Ratio >110dB (Line, A-weighted); >75dB (Phono MM, A-weighted)
DAC
D to A Converter ES9038Q2M
Total Harmonic Distortion (THD) <0.002% (1kHz @ 0dBFS)
Output level (0dBFS, 1KHz) 2.3Vrms
Max. Sampling Frequency Optical, Coaxial: 192kHz, PC USB: PCM768kHz, DSD512
Signal-to-Noise Ratio (S/N) >115dB (A-weighted)
Power Amplifier Section
Gain +32dB
Rated Power Output 2 x 75W (8ohm, THD<1%); 2 x 115W (4ohm, THD<1%)
Frequency Response 20Hz-20kHz (+/-0.3dB)
Total Harmonic Distortion (THD) <0.003% (1kHz @30W/8ohm)
Input Sensitivity 550mV
Signal-to-Noise Ratio (S/N) >109dB (A-weighted
Headphone Amplifier
Total Harmonic Distortion (THD) <0.01% (1kHz, 50mW)
Output Impedance 4.7ohm
Load Impedance 16-600ohm
General
Standby Power Consumption <0.5W
Net Weight 12.7kg (Walnut) / 11.1kg (Silver)
Gross Weight 15.2kg (Walnut) / 12.7kg (Silver)
Dimensions (mm) (W x H x D) 328*147*414 (Walnut) / 300*115*414 (Silver)
Carton Size (mm) (W x H x D) 514*428*210 (Walnut / Silver)
Finish Walnut / Silver
Power Requirements (depending on region) 220-240V ~ 50/ 60Hz
100-120V ~ 50/ 60Hz
Standard Accessories Power Cord, Remote Control, User Manual, Antennas, etc. /////////Wharfedale LINTON Heritage Specification

General Description 3-way vented-box/standmount
Enclosure Type Bass reflex
Transducer Complement 3-way
Bass Driver 8″(200mm) black woven Kevlar® cone
Midrange Driver 5″(135mm) black woven Kevlar® cone
Treble Driver 1″ (25mm) soft dome
AV Shield No
Sensitivity (2.0V @ 1m) 90dB
Recommended Amplifier Power 25-200W
Peak SPL 110dB
Nominal Impedance 6Ω
Minimum Impedance 3.5Ω
Frequency Response(+/-3dB) 40Hz ~ 20kHz
Bass Extension(-6dB) 35Hz
Crossover Frequency 630Hz & 2.4kHz
Height (on plinth) 565mm
Width 300mm
Depth (with terminals) (330+30)mm
Net Weight 18.4kg 18.4kg/pcs