new prodects coming Oxygen Sensor 1 Upstream Front for Chevrolet Corvette V8 6.0L 6.2L 7.0L HHR 2.4L 4 Wires Lambda 234 4332 Auto Parts Replacement
ข้อมูลสินค้า
ราคา
592.20 467.78 บาท
แบรนด์
No Brand
ร้านค้า
- Sensor Type：Piezoelectric
- Type：Heating Type
- Measuring Range：Upstream Sensor 1 Pre-Cat Front
- Hysteresis：Direct Replacement
- Sensitivity：234-4332 12581966 12602047
- Linear：2131694 2344332 SU9606
- Repeatability：Front
- Resolution：for 2005-2013 Chevrolet Corvette V8-6.2L Upstream
- Replaces OEM Part Number:
- 234-4332
- Fit for:
- Upstream 2008 2009 2010 2011 2012 2013 Chevrolet Corvette 6.2L Naturally Aspirated
- Upstream 2006 2007 2008 2009 Chevrolet Corvette 7.0L Naturally Aspirated
- Upstream 2005 2006 2007 Chevrolet Corvette 6.0L Naturally Aspirated
- Upstream 2006 2007 Chevrolet HHR 2.4L Naturally Aspirated
- Package included:
- 1 x Oxygen Sensor
- Note:
- 1. Please check OEM number before purchasing.
- 2. Please allow 1-2cm error due to manual measurement. Thanks for your
- understanding.
- 3. Monitors are not calibrated same item color displayed in photos may be
- showing slightly different from the real object. Please take the real one as
- standard.
- Must Know Before Buying:
- A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to
- changes in the air/fuel mixture by Voltage Measurement or Waveform Simulation.
- Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire
- and the black probe to engine ground. (Use back probe method DO NOT pierce the wire.) For a good
- sensor voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or
- 3 minutes.
- Please take a video clip of the voltmeter and contact us if our sensor:
- Goes above range between 0.1 and 0.9 volt
- Remains below 0.5 volts
- Stays fixed at a particular voltage
- You're free to choose replacement or refund if our sensor fails to work in this case.
Sensor Type：PiezoelectricType：Heating TypeMeasuring Range：Upstream, Sensor 1, Pre-Cat, FrontHysteresis：Direct ReplacementSensitivity：234-4332 12581966, 12602047Linear：2131694, 2344332, SU9606Repeatability：FrontResolution：for 2005-2013 Chevrolet Corvette V8-6.2L UpstreamReplaces OEM Part Number:234-4332Fit for:Upstream 2008 2009 2010 2011 2012 2013 Chevrolet Corvette 6.2L Naturally AspiratedUpstream 2006 2007 2008 2009 Chevrolet Corvette 7.0L Naturally AspiratedUpstream 2005 2006 2007 Chevrolet Corvette 6.0L Naturally AspiratedUpstream 2006 2007 Chevrolet HHR 2.4L Naturally AspiratedPackage included: 1 * Oxygen SensorNote:1. Please check OEM number before purchasing.2. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.Must Know Before Buying: A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness tochanges in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.Use a 10-megaohm digital voltmeter. Hook up the voltmeters red probe to the sensors signal wireand the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a goodsensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or3 minutes.Please take a video clip of the voltmeter and contact us if our sensor:Goes above range between 0.1 and 0.9 voltRemains below 0.5 voltsStays fixed at a particular voltageYoure free to choose replacement or refund if our sensor fails to work, in this case.
