new prodects coming 4 Wires Oxygen Sensor Downstream Rear Lambda 234-4243 for Chevrolet Express 2500 3500 GMC Canyon Envoy Savana 1500 2500 3500
ข้อมูลสินค้า
ราคา
874.91 691.43 บาท
แบรนด์
No Brand
ร้านค้า
- Sensor Type:Piezoelectric
- Type:Heating Type
- Measuring Range:for 2008-2015 Chevrolet Express 2500 3500 V8-4.8L 6.0L
- Hysteresis:for 2009-2012 GMC Canyon Envoy V8-5.3L
- Sensitivity:234-4243 12609477 12612571 12609949
- Linear:for 2008 Chevrolet Trailblazer V8-5.3L 6.0L
- Repeatability:for 2008-2014 GMC Savana 1500 V6-4.3L V8-5.3L
- Resolution:152822105975-2537234-4243126099492344243
- Replaces OEM Part Number:
- 234-4243 12609477 12612571 12609949
- Fit for:
- 2008-2015 Chevrolet Express 2500 V8-4.8L Downstream
- 2008-2015 Chevrolet Express 2500 V8-6.0L Downstream
- 2008-2015 Chevrolet Express 3500 V8-4.8L Downstream
- 2008-2015 Chevrolet Express 3500 V8-6.0L Downstream
- 2008 Chevrolet Trailblazer V8-5.3L Downstream
- 2008 Chevrolet Trailblazer V8-6.0L Downstream Right
- 2009 Chevrolet Trailblazer V8-6.0L Downstream
- 2009-2012 GMC Canyon V8-5.3L Downstream
- 2008-2009 GMC Envoy V8-5.3L Downstream Right
- 2008-2014 GMC Savana 1500 V6-4.3L Downstream
- 2008-2014 GMC Savana 1500 V8-5.3L Downstream
- 2008-2015 GMC Savana 2500 V8-4.8L Downstream
- 2008-2015 GMC Savana 2500 V8-6.0L Downstream
- 2008-2015 GMC Savana 3500 V8-4.8L Downstream
- 2008-2015 GMC Savana 3500 V8-6.0L Downstream
- 2008-2010 Hummer H3 V8-5.3L Downstream
- 2009-2010 Hummer H3T V8-5.3L Downstream
- 2008-2009 Saab 9-7X V8-6.0L Downstream Right
- 2008-2009 Saab 9-7X V8-5.3L Downstream Right
- Package included:
- 1X(4 wire-Oxygen Sensor):
- Note:
- 1. Please check OEM number before purchasing.
- 2. Please allow 1-2cm error due to manual measurement. Thanks for your
- understanding.
- 3. Monitors are not calibrated same item color displayed in photos may be
- showing slightly different from the real object. Please take the real one as
- standard.
- Must Know Before Buying:
- A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness
- to changes in the air/fuel mixture by Voltage Measurement or Waveform Simulation.
- Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire
- and the black probe to engine ground. (Use back probe method DO NOT pierce the wire.) For a
- good sensor voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the
- engine for 2 or 3 minutes.
- Please take a video clip of the voltmeter and contact us if our sensor:
- Goes above range between 0.1 and 0.9 volt
- Remains below 0.5 volts
- Stays fixed at a particular voltage
- You're free to choose replacement or refund if our sensor fails to work in this case.
Sensor Type:PiezoelectricType:Heating TypeMeasuring Range:for 2008-2015 Chevrolet Express 2500 3500 V8-4.8L 6.0LHysteresis:for 2009-2012 GMC Canyon Envoy V8-5.3LSensitivity:234-4243 12609477 12612571 12609949Linear:for 2008 Chevrolet Trailblazer V8-5.3L 6.0LRepeatability:for 2008-2014 GMC Savana 1500 V6-4.3L V8-5.3LResolution:15282,21059,75-2537,234-4243,12609949,2344243Replaces OEM Part Number:234-4243 12609477 12612571 12609949Fit for:2008-2015 Chevrolet Express 2500 V8-4.8L Downstream2008-2015 Chevrolet Express 2500 V8-6.0L Downstream2008-2015 Chevrolet Express 3500 V8-4.8L Downstream2008-2015 Chevrolet Express 3500 V8-6.0L Downstream2008 Chevrolet Trailblazer V8-5.3L Downstream2008 Chevrolet Trailblazer V8-6.0L Downstream Right2009 Chevrolet Trailblazer V8-6.0L Downstream2009-2012 GMC Canyon V8-5.3L Downstream2008-2009 GMC Envoy V8-5.3L Downstream Right2008-2014 GMC Savana 1500 V6-4.3L Downstream2008-2014 GMC Savana 1500 V8-5.3L Downstream2008-2015 GMC Savana 2500 V8-4.8L Downstream2008-2015 GMC Savana 2500 V8-6.0L Downstream2008-2015 GMC Savana 3500 V8-4.8L Downstream2008-2015 GMC Savana 3500 V8-6.0L Downstream2008-2010 Hummer H3 V8-5.3L Downstream2009-2010 Hummer H3T V8-5.3L Downstream2008-2009 Saab 9-7X V8-6.0L Downstream Right2008-2009 Saab 9-7X V8-5.3L Downstream Right Package included: 1X(4 wire-Oxygen Sensor):Note:1. Please check OEM number before purchasing.2. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.Must Know Before Buying: A: The only way to know if the O2 sensor is functioning normally is to check its responsivenessto changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.Use a 10-megaohm digital voltmeter. Hook up the voltmeters red probe to the sensors signal wireand the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For agood sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting theengine for 2 or 3 minutes.Please take a video clip of the voltmeter and contact us if our sensor:Goes above range between 0.1 and 0.9 voltRemains below 0.5 voltsStays fixed at a particular voltageYoure free to choose replacement or refund if our sensor fails to work, in this case.