Behringer FLOW 8 | ดิจิตอลมิกเซอร์ 8-Input Digital Mixer with Bluetooth Audio and App Control, 60 mm Channel Faders, 2 FX Processors and USB/Audio Interface
Digital Mixing with Ease

Digital mixers offer studio quality processing, highest fidelity, total recall of all settings and even remote operation. Those are hugely attractive features, but they all come at a cost - with bigger physical size, more complex operation requiring at least some degree of audio technical education.

The millions of analog small format mixers that Behringer has built over the years clearly tell us that there are many users who need a mixer that is compact, affordable, dependable and easy to operate.

Behringer FLOW 8

Typical applications very often just need to balance the level of a handful of sources. So, why making things more complicated than they need to be? It is time for something genuinely new providing modern features and workflows to everyone in a simple and light form – it is time for FLOW 8 digital mixing.

EZ-Gain Assisted Gain Staging

Have you ever heard someone say, “you need to pay attention to your gain staging”? Do you know what the “gain structure” is about? When you are interested in clean and healthy signals, with low noise and low harmonic distortion, then adjusting the right amount of preamp gain is paramount. It is defining the amount of amplification a signal gets when entering the mixer. Since source signals can be anything from a strong hit on the snare drum, to the subtle hum of bees, there is not one gain fitting all possible purposes.

Gain staging is always a compromise and finding the right one requires either experience and technical knowledge, or the new FLOW 8 EZ-GAIN feature. The function can monitor signals on one or all channels at the same time, until you think the loudest sounds have been put to it. EZ GAIN will then automatically adjust the channel gain to the optimum headroom.

Oh, by the way, EZ GAIN will automatically engage the 48 V phantom power on mic inputs 1/2 when no signal is coming in, just in case you forgot to do that. It will switch it off again if no signal is coming in still.

Behringer FLOW 8

Full App Remote Control

Let’s face it, small mixers are more often placed where cables end, rather than in a position where it would be most useful for controlling the mix. You may have to stretch out for controlling levels or walk away from the mixer to judge if your adjustment has the desired effect. No longer!
FLOW 8 mixers offer full remote control from basically any Android or iOS device, giving you the freedom to go exactly where the sound is ideal for making any sort of adjustment. Tweak the 9-band EQ for the main PA speakers, set the compressor on the bass guitar or adjust the mix for the talents on stage…

Specification

Mic Inputs
Mic inputs 1 / 2
Type
2 x XLR jacks, balanced
Mic E.I.N. (20 Hz to 20 kHz)
-129 dBu, A-weighted
Distortion (THD+N)
< 0.004%, A-weighted
Max. input level
+20 dBu
Impedance
10 kΩ balanced, 5 kΩ unbalanced
Mic inputs 3 / 4
Type
2 x XLR / 1/4" TRS combo jacks, balanced
Mic E.I.N. (20 Hz to 20 kHz)
-117 dBu, A-weighted
Distortion (THD+N)
< 0.01%, A-weighted
Max. input level
XLR: +6 dBu
TRS: +26 dBu
Impedance
XLR: 2 kΩ balanced, 1 kΩ unbalanced
TRS: 20 kΩ balanced, 10 kΩ unbalanced
Gain range
-20 dB to +60 dB
Phantom power
+48 V, switchable (inputs 1 / 2 only)
Line Inputs
Type
2 x 1/4" TRS jacks, balanced (channels 5L / 7L)
Impedance
20 kΩ balanced, 10 kΩ unbalanced
Gain range
-20 dB to +60 dB
Distortion (THD+N)
0.005%, A-weighted, 0 dB gain, 0 dBu out
Max. input level
+22 dBu
Guitar (Hi-Z) Inputs
Type
2 x 1/4" TRS jacks, balanced (channels 6R / 8R)
Impedance
2 MΩ balanced, 1 MΩ unbalanced
Distortion (THD+N)
0.005%, A-weighted, 0 dB gain, 0 dBu out
Max. input level
+19 dBu
Channel EQ
Low
±15 dB @ 20 Hz, shelving
Low mid
±15 dB @ 300 Hz
High mid
±15 dB @ 1.5 kHz
Highi
±15 dB @ 20 kHz, shelving
Monitor Outputs
Type
2 x 1/4" TRS jacks, balanced
Impedance
75 Ω, balanced
Max. output level
+14 dBu
Main Outputs
Type
2 x XLR jacks, balanced
Impedance
150 Ω, balanced
Max. output level
+14 dBu
Phones Output
Type
1 x 1/4" TRS jack, stereo
Max. output level
+18 dBm / 40 Ω
Footswitch Input
Type
1 x 1/4" TRS jack (tip / ring normally open)
Function configurable
FX mute / Tap tempo or Snapshot load next / previous
Input / Output and Processing
Frequency range
10 Hz to 22 kHz (+0/-1 dB)
Dynamic range, analog in to analog out
Typ. 108 dB
I/O latency
0.6 ms
Signal processing
32-bit VFP (Vector Floating Point)
A/D - D/A conversion
24-bit / 48 kHz
Dynamic range
114 dB
Number of input processing channels
10 input channels, 4 fx return channels
USB Audio Interface
Interface type
USB 2.0
Connector
Type B
Bit depth
24-bit / 48 kHz
Channels
10 out / 2 in
Bluetooth
Frequency range
2402 MHz ~ 2480 MHz
Channel number
79

Versi