✅รับส่วนลด 10% สูงสุด 1,000 บาท กรอก 10DDXNOVW2
✅รับเงินคืน 15% สูงสุด 1,000 Coin กรอก 15CCBNOVW2
📅 วันนี้ - 19 พ.ย. 2023 เท่านั้น

โค้ดพิเศษเฉพาะลูกค้า CT Music ทุกท่าน
💌 กรอกโค้ด H9GKJPAU ลด 10% ลดสูงสุด 400.- เมื่อช้อปครบ 3,000.-
💌 กรอกโค้ด 8DBG372D ลด 15% ลดสูงสุด 700.- เมื่อช้อปครบ 5,000.-

📮 โค้ดใช้ได้ตั้งแต่ 1 - 30 พ.ย. เท่านั้น!! The dbx Di1 is a compact high-quality active direct injection box. Ideal for both studios and on the road, the Di1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.

Connect the output from electric guitars, bass amplifiers, keyboards, etc., directly to a console mixer without the use of a microphone.

Built for toughness and reliability, the Di1 has all the features of a fully featured gig-ready workhorse DI unit.


Features
Level and impedance matching function
Output impedance: > 600 Ohms
Signal pass through connector
Output connector: XLR balanced
Battery LED indicator
Distortion: (THD) < 0.005% at 1kHz, 0dBu
Phantom power LED indicator
Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
Output Noise: <-100dB unweighted
TS and XLR inputs and outputs
Frequency response: 10Hz to 70kHz, +0dB/-3dB
Attenuation control
Phantom Power: +18 volts DC to +48 volts DC
Ground lift switch
Main/Standby: 9V battery
Input Impedance: >250k Ohm
Metal Chassis
TS and XLR inputs and outputs
+12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)


Specifications
Input Impedance > 250k Ohm
Max Input +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)
Connectors Two Parallel 1/4″ jack connectors and a parallel XLR connector (unbalanced), 1/4″ Jack: Tip Hot, Sleeve Ground; XLR Jack: Pin 2 Hot, Pins 1 & 3 Ground
Output Impedance > 600 Ohms
Output Connectors XLR balanced
Distortion (THD) < 0.005% at 1kHz, 0dBu
Output Noise <-100dB unweighted
Frequency Response 10Hz to 70kHz, +0dB/-3dB
Main/Standby 9 Volt battery
Phantom Power +18 Volts DC to +48 Volts DC