////////////////ONKYO TX-RZ50 THX Certified AV Receiver 9.2 ชาแนล 250 วัตต์ต่อชาแนล DIRAC Live® Room Correction และ THX Certification Power output (All channels)
250 W/Ch (6 ohms, 1 kHz, 10% THD, 1 channel driven) 120 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2 channels driven, FTC)
Dynamic power
250 W (3 ohms, Front) 220 W (4 ohms, Front) 130 W (8 ohms, Front)
THD+N (Total Harmonic Distortion + Noise)
0.08% (20 Hz–20 kHz, half power)
Input sensitivity and impedance
200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM)
Rated RCA output level and impedance
1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out)
Frequency response
5 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
Tone control
±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble)
Signal-to-noise ratio
106 dB (Line, IHF-A) 80 dB (Phono, IHF-A)
Speaker impedance
4–16 ohms Power supply
AC 120 V~, 60 Hz
Power consumption (operating)
850 W
Power consumption (idle)
75 W
Power consumption (standby)
0.1 W
Dimensions (W x H x D)
17 1/8˝ x 7 15/16˝ x 15 11/16˝ (435 x 201.5 x 398 mm)
Weight
30.9 lbs. (14.0 kg) ////////////////KLIPSCH RP-8000F II มี ฮอร์น Tractrix® ผสมซิลิโคนแบบใหม่ที่ใหญ่ขึ้น 90° x 90 สเปค
FREQUENCY RESPONSE 35-25kHz +/- 3dB
SENSITIVITY 98dB @ 2.83V / 1m*
POWER HANDLING (CONT/PEAK) 150W/600W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 1630Hz
HIGH FREQUENCY DRIVER 1″ Titanium LTS Vented Tweeter with Hybrid Cross-Section Expanded Tractrix® Horn
LOW FREQUENCY DRIVER Dual 8″ Cerametallic Cone Woofers with Faraday rings
ENCLOSURE MATERIAL MDF (Internally Braced)
ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port
INPUTS Dual binding posts / bi-wire / bi-amp with Dolby Atmos® passthrough
HEIGHT INCHES (MM) 43.10″ (109.5 cm)
WIDTH INCHES (MM) 10.84″ (27.5 cm)
DEPTH INCHES (MM) 18.25″ (46.3 cm)
PRODUCT WEIGHT LBS (KG) 61.4lb (27.85kg)
FINISH Ebony, Walnut /////////////Klipsch Reference Premiere RP-504C II 2.5-Way Center Channel Speaker Configuration Center:
2.5-Way
Power Handling 150 W RMS
600 W Peak
Drivers 4 x 5.25" Aluminum/Cerametallic Cone Woofer (Front-Firing)
1 x 1" Titanium Horn Tweeter (Front-Firing)
Enclosure Type Bass-Reflex
Frequency Response 50 Hz to 25 kHz (±3 dB)
Impedance 8 Ohms
Wired Connectivity 1 x Binding Post Pair Input
Crossover 650 Hz
1950 Hz
Sensitivity 96 dB
Physical
Placement & Mounting Options Tabletop/Bookshelf
Cabinet Material MDF, Vinyl
Grille Metal (Removable)
Dimensions 32 x 6.9 x 15.1" / 81.4 x 17.4 x 38.3 cm
Weight 36.4 lb / 16.5 kg
Packaging Info
Package Weight 41.945 lb
Box Dimensions (LxWxH) 36.3 x 19.4 x 12.1" // //////////////Klipsch Klipsch Reference Premiere RP-600M II Reference Premiere RP-600M II
Bookshelf speakers Product highlights:
1" LTS (Linear Travel Suspension) titanium diaphragm tweeter with Tractrix® horn
6-1/2" Cerametallic™ cone woofer
frequency response: 44-25,000 Hz (± 3dB)
power handling: up to 100 watts RMS
sensitivity: 94 dB
impedance: 8 ohms
bass-reflex design with rear-firing Tractrix port
magnetic grille protects drivers and looks stylish
furniture-grade ebony vinyl with scratch-resistant design and satin-painted baffles
aluminum binding post speaker terminals with audiophile-grade internal speaker wiring
cork pads on bottom add stability and security while helping decouple the speaker from surfaces
dimensions (measured by Crutchfield): 8"W x 15-13/16"H x 13-1/6"D
weight: 18.1 lbs. (each)