///////////////Onkyo TX-NR7100 9.2คุณสมบัติ
220 W/Ch THX® Certified Select Dynamic Audio Amplification system
IMAX® Enhanced certified for immersive signature sound by DTS:X®
5.2.4-ch/7.2.2-ch Dolby Atmos® and DTS:X playback
Supports Dirac Live® Room Correction
AccuReflex phase-matching solution for Atmos-enabled speakers
SMART AV Receiver™
Works with Hey Google or Alexa
Stream over 5 GHz/2.4 GHz dual-band Wi-Fi® supporting the 802.11ac standard
HDMI® inputs
HDMI 2.1
HDMI Sub/Zone 2 Out for media transmission to a second display
Send or receive audio via Bluetooth® wireless technology
Refined chassis, HDMI board, DAC, Digital/Analog inputs, power-amp grounds and power lines
5.2-ch Main + Powered Zone 2 + Powered Zone 3 speakers support synced/independent D/A audio playback
Zone 2/Zone B line-out*7 (analog RCA) supports synced or independent D/A playback*8 on compatible audio systems or headphone docks //////////////////Klipsch RP-5000F II FREQUENCY RESPONSE 40-25kHz +/- 3dB
SENSITIVITY* 95dB @ 2.83V / 1m*
POWER HANDLING (CONT/PEAK) 100W / 400W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 1900Hz
HIGH FREQUENCY DRIVER 1" Titanium LTS Vented Tweeter with Hybrid
Cross-Section Expanded Tractrix® Horn
LOW FREQUENCY DRIVER Dual 5.25" Cerametallic Cone Woofers with Faraday
rings
ENCLOSURE MATERIAL MDF (Internally Braced)
ENCLOSURE TYPE Bass Reflex via dual chamber rear-firing Tractrix® Ports
INPUTS Dual aluminum binding posts / bi-wire / bi-amp with
Dolby Atmos® passthrough
HEIGHT INCHES (MM) 36.10 (91.7 cm)
WIDTH INCHES (MM) 8.15" (20.7 cm)
DEPTH INCHES (MM) 14.75" (37.5 cm)
PRODUCT WEIGHT LBS (KG) 38.6lb (17.55kg)
FINISH Ebony, Walnut /////////////////Klipsch Reference Premiere RP-500M II Product highlights:
1" LTS (Linear Travel Suspension) titanium diaphragm tweeter with Tractrix® horn
5-1/4" Cerametallic™ cone woofer
frequency response: 50-25,000 Hz (± 3dB)
power handling: up to 75 watts RMS
sensitivity: 92 dB
impedance: 8 ohms
bass-reflex design with rear-firing Tractrix port
magnetic grille protects drivers and looks stylish
furniture-grade walnut vinyl with scratch-resistant design and satin-painted baffles
aluminum binding post speaker terminals with audiophile-grade internal speaker wiring
cork pads on bottom add stability and security while helping decouple the speaker from surfaces
dimensions (measured by Crutchfield): 6-7/8"W x 13-9/16"H x 10-5/8"D
weight: 13.1 lbs. (each) ///////// Klipsch RP-404C II FREQUENCY RESPONSE 87-25kHz +/- 3dB
SENSITIVITY* 94dB @ 2.83V / 1m*
POWER HANDLING (CONT/PEAK) 125W/500W
NOMINAL IMPEDANCE 8 Ohms Compatible
CROSSOVER FREQUENCY 650Hz/1900Hz
HIGH FREQUENCY DRIVER 1" Titanium LTS Vented Tweeter with Hybrid
Cross-Section Expanded Tractrix® Horn
LOW FREQUENCY DRIVER Quad 4" Cerametallic™ Cone Woofers with Faraday rings
ENCLOSURE MATERIAL MDF (Internally Braced)
ENCLOSURE TYPE Sealed
INPUTS Single aluminum binding posts
HEIGHT INCHES (MM) 5.72" (14.5 cm)
WIDTH INCHES (MM) 26.85" (68.2 cm)
DEPTH INCHES (MM) 6.47" (16.4 cm)
PRODUCT WEIGHT LBS (KG) 20.3lb (9.25kg)
FINISH Ebony, Walnut ///////////////////KLIPSCH SPL-120 SUBWOOFER 10" คุณสมบัติเด่น
สเปค
FREQUENCY RESPONSE 24Hz – 125Hz
MAXIMUM ACOUSTIC OUTPUT 118dB
AMPLIFIER TYPE Class D with Analog Preamp Stage
AMPLIFIER POWER 300W RMS / 600W Peak
WOOFER 12” Long-Throw Cerametallic
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass Reflex via Front-Firing Slot Port
INPUTS Dual RCA/LFE Line In, WA-2 Wireless Port
HEIGHT 17-3/4” (451mm)
WIDTH 14-11/16” (374mm)
DEPTH 19-7/8” (506mm)
FINISH Ebony Vinyl
BUILT FROM 2018