SET Rega Kyte + Brio + Planar 1

Rega Kyte Bookshelf Speakers

Key Features:
Custom designed phenolic resin cabinets
Unique ceramic plate & cross brace construction
Handmade MX-125 bass-mid unit
Rega designed ZRR high frequency unit
Bass reflex design, rear ported
UK designed and manufactured
Lifetime warranty against manufacture defects

SPEAKER SPECS:
Type Integrated
Design Bookshelf
Amplifier Requirements80 W per channel
Sensitivity89 dB
Nominal Impedance6 Ohms
GENERAL:
Finish lack
Product dimensions (mm)325 x 188 x 232
Weight3.73 kg


Rega Brio
The latest Brio from Rega is a long-established quality integrated amplifier, taking half the space of a traditional hifi separates amp and incorporating true audiophile technology to result in a deserving sound. Rega has revisited the Brio-R to develop and launch its 2017 equivalent, featuring a range of upgrades to build upon the R models prestigious and well-earned reputation.

A new housing construction improves upon the Brios circuitry and internal components. Its internals now sits within a two-part case, built from an entire aluminium design, upgrading the heat-sink capabilities of the machine as well as improving the already robust build quality and stellar reliability. The Brio sees the addition of an intelligently placed headphone socket, built to reduce the level of potential interference between this headphone stage and main audio circuit with a superlative Moving Magnet phonostage built-in to the unit in a similar fashion. The Brio certainly delivers a high current feed to your loudspeakers, making it seem much more powerful than the 50W specification would suggest. A very high quality moving magnet phono stage makes the Brio an obvious choice to partner with the Planar 3 turntable and Elys/ Exact cartridge.
Specification
Power Output Rating50 Watts RMS both channels / 8 Ohm
58 Watts RMS one channel / 8 Ohm
73 Watts RMS both channels / 4 Ohm
93 Watts RMS one channel / 4 Ohm
(Note: Continued high-level use into 4Ω may cause the case to exceed 40° C above the ambient temperature)
Power Consumption195 Watts at 230V/220V/115V/100V / 8 Ohm
Inputs1 x Phono, 4 x RCA
Outputs1 x RCA Record, 1 x Loudspeakers, 1 x Headphone (Front)
Dimensions (W x H x D)216mm x 78mm x 345mm
Weight5.1kg

Rega Planar 1
KEY FEATURES
RB110 tonearm with ultra-low friction play bearings
Factory fitted Carbon moving magnet cartridges
Phenolic resin, flywheel effect platter
High quality, 24 V low noise synchronous motor
TONEARM
Brand new RB110 tonearm built with the new Rega designed, bespoke, ultra-low friction bearings (patent pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘plug &play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.
CARTRIDGE
Rega Carbon cartridge supplied fitted as standard.
24 V SYNCHRONOUS MOTOR
The first entry-level Rega turntable to use a 24 V, synchronous AC motor with a new motor PCB and aluminum pulley offering low noise and better speed stability.
PLINTH
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, high gloss black and high gloss white.
CENTRAL BEARING HOUSING
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimizing the transfer of potential energy (patent pending).
PLATTER
Brand new, 23 mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.
RE-DESIGNED FEET
New improved feet to increase stability and reduce vibration transfer.
MOTOR COVER TRAY
New motor cover tray with integrated cooling.

Dimensions: 17.7" x 15.1" x 4.5"
Weight: 12.1 lbs.