YA201 Code Reader Auto OBDII Engine Fault Scan Tools PK KW680 OM123
1:Free Upgrade Life Time:Just Put in the USB and Paste the files into Flash disk
2:Data stream sorting
3:Find The Cause Of The Fault Code
4:Support vehicles1998 &newer (OBDII &CAN)
5:YA201 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
6:Multi-Language:English , French , Russian , Spanish ,German, Italian ,Portuguese, Japanese, Chinese
Support Car Models for OBDII diagnostic function:
(Note: All Code reader only Support 12V cars, Does not support 24V Truck )
4 Keys:
"OK Key":ENTER key selects iter
"Back Key":BACK key returns to previous screen
"UP Key":UP SCROLL Key
"DownKey": Down SCROLL Key
Introduction
YA101 provides full OBDII/EOBD diagnostic functions and meets protocols such asISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
American Car :
Need Standard OBD2 Protocols from2000to now
European Car :
Need Standard OBD2 Protocols from2003to now
Japanese/Korean Car:
Need Standard OBD2 Protocols from2006to now
Chinese Car:
Need Standard OBD2 Protocols from2009to now
Russian Car ：
Need Standard OBD2 Protocols from2012to now
What can YA101 OBD2 Scannerdo ?
Erase Codes:Deletes DTCs from vehicles memory.
Live Data:Live Data menu lets you view, record and playback real time PIDs data fromthe electronic control module.In live data menu, you can insert the selected item to front by holdingpressing the key for 3 seconds.
Freeze Frame:Displays a snapshot of operating conditions at the time of a fault.
Vehicle Info:Scan tool displays the vehicles VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)The tool also displays In-Use Performance Tracking of importantreadiness monitors.
Component Test:Tool will display a list of components and their locations on the
On-Board Monitoring:Scan tool controls the operation of vehicle components, tests or systems.
O2 Sensor Test:Displays oxygen sensor monitoring test results from the vehicles memory,the O2 Monitor Test is NOT an ON-DEMAND TEST.
Functions
I/M Readiness:Displays a snapshot of the state of the vehicles OBDII Monitors.
NOTE:
* To review I/M Readiness status,make sure that the ignition key is switched
to ON with the engine off.
* Not all monitors are supported by all :
* since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.
* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.
2 .DTC Look Up
Looks up definitions of DTCs stored in scan tool, and shows the possible causes of the DTC. (NOT every DTC with possible causes reason)
3. Voltage Test
This function is used to monitor the voltage present on pin 16 of the OBDIIData Link Connector.
4.Languages:
English,chinese,France,Deutsch,Italian ,Japanese,Espanish,Russian,Portuguese
Data Logging:Turn on /off the data log function to record the device data through vehicle.
Self-test:Display Test. Used to check the display screen.Keyboard Test. Verifies that the keys are working correctly.
5. Update
pls install update tool from webiste, and copy the newest firmware ,paste to the YA101.
?tid=7
