OBD2 Scanner ELM327 V1.5 WIFI Scanner Car Scanner for Car OBDII Diagnostic Tool Code Reader

Supported OBD-II protocol:SAE J1850 PWM (41.6Kbaud), SAE J1850 VPW (10.4Kbaud), ISO9141-2(5 baud init, 10.4Kbaud), ISO14230-4 KWP (5 baud init, 10.4 Kbaud), ISO14230-4 KWP (fast init, 10.4 Kbaud), ISO15765-4 CAN (11bit ID, 500 Kbaud), ISO15765-4 CAN (29bit ID, 500 Kbaud), ISO15765-4 CAN (11bit ID, 250 Kbaud), ISO15765-4 CAN (29bit ID, 250 Kbaud)
Wifi ELM327 Description: OBD-II Software for ELM327 bluetooth is a free program that allows you to use your PC and a hardware interface to get the information from your cars computer.
It is also very easy to install: simply extract the files into a folder on your computers hard drive, and youre ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
The program lets you perform the following operations: Read diagnostic trouble codes, both Universal and manufacturer-specific, and display their meaning (over 3000 Universal code definitions in the database).

Clear trouble codes and turn off the MIL ("Check Engine" light)
Display current sensor data, including: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure, AND Many others...
SSID: WiFi_OBD
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Compatible software:
Window version: ScanMaster-ELM, ScanTool.net, PCMSCAN;
Android version: Torque, DashCommand, EOBD;
IOS version: OBD Car Doctor, DashCommand, EOBD;
Symbian version: