|
|
| Product Number | LS-H21 |
| Part Number | LS-H21 |
| Regulatory compliance | EMC Directive, RoHS Directive |
| Applicable amplifiers | LS-401(P), LS-401(P)-C2, LS-403 |
| Sensing range:U-LG mode | 30 to 1,000 mm1.181 to 39.370 in |
| Sensing range:STD mode | 30 to 500 mm1.181 to 19.685 in |
| Sensing range:FAST mode | 30 to 300 mm1.181 to 11.811 in |
| Sensing range:H-SP mode | 30 to 300 mm1.181 to 11.811 in |
| Operation indicator | Orange LED (lights up when the amplifier output is ON) |
| Laser emission indicator | Green LED (lights up during laser emission) |
| Spot-shape adjuster | Multi-turn adjuster |
| Protection | IP40 (IEC) |
| Ambient temperature | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage:-20 to +70 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm0.059 in(10 G max.) double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting element:IEC / JIS / GB standards conforming type | Red semiconductor laser,Class 2 (IEC / JIS / GB)(Max. output: 3 mW Peak emission wavelength: 655 nm0.026 mil) |
| Emitting element:FDA / IEC / JIS standards conforming type | Red semiconductor laser,Class 2 (FDA / IEC / JIS)(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50. |
| Material | Enclosure: PBT (Mounting part: PEI)Lens cover: Acrylic |
| Cable | 0.1 mm2, single core two parallel shielded cables, 2 m6.562 ftlong(Connector for amplifier attached)(Note) Cable cannot be extended. |
| Weight | Net weight: 30 g approxGross weight: 40 g approx |
| Accessory | Warning label: 1 set(Labels are written in Japanese, English and Chinese for compliance with various standards.) |
