The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design fromLilyPad..
Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby.
Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable.
Note: The miniUSB connector is used for battery charging only. To bootload new firmware, you will need an external serial connection over a Programmer, FT232RL Breakout Board, or other serial connection.Note :The XBee socket and FTDI connection live on the same TX/RX pins of the ATmega328. You will need to remove the XBee module while reprogramming over serial. We recommend using a wireless bootloader whenever possible to avoid this step.