The basic public address mixer amplifiers have power ratings from 60W, 120W, 240W, 350W,
500W to 650W. They are featured of 3 balanced microphone inputs, 2 aux inputs and 1 EMC
input. Priority muting is achieved via EMC for overriding other inputs except Mic1 on front
panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls
and master volume control are provided for overall tone control. 70V, 100V and low
impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit,
overload and high temp.
Features
Mixer amplifier for paging and background music system
Rated power from 60W, 120W, 240W, 350W, 500W to 650W
2U rack mount (less than 350W) and 3U rack mount design
70V, 100V and low impedance 4-16ohm speaker output
Three balanced Mic input
Mic 1(phone jack) with VOX priority and VOX level on front panel
Mic 2-3 by XLR type on rear panel with phantom power
Two Aux Inputs and 2 line inputs for spare use
One EMC priority input
EMC has priority over all inputs except MIC1
Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control