RODE NT55 | Small-diaphragm Condenser Mic with Cardioid and Omnidirectional Capsules
ไมค์คอนเดนเซอร์ชนิด Small-diaphragm สามารถปรับ PAD ได้ 3 ระดับ (0, -10dB, -20dB) และปรับ High Pass Filter ได้ 3 ระดับ (Off, 75Hz, 150Hz) เหมาะสำหรับงานบันทึกเสียง acoustic instruments, drum overheads, cymbals และ live performances มาพร้อมกับหัวไมค์แคปซูล 2 แบบ Cardioid / Omni และตัวจับไมค์

Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a pencil mic. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.

The NT55 is designed and made in Australia, and covered by RØDEs industry leading 10 year warranty.

Features

Externally biased condenser
Cardioid or Omni polar pattern using included interchangable capsules
Gold sputtered 1/2” capsule
Three position PAD - 0dB, -10dB and -20dB
Three position High-Pass Filter - flat, 75Hz and 150Hz
Surface mount circuitry
Low noise
Available as Certified Matched Pair
10 year extended warranty when you register online at www.rodemic.com/warranty

In the box

NT55 - Multi-Pattern 1/2" Condenser Microphones
NT45-O - Interchangeable Omnidirectional Capsule
RM5 - Durable Microphone Clip

Specifications
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 0.50"
Polar Pattern Cardioid, Omni
Address Type End
Frequency Range 20Hz - 20kHz
Output Impedance 100Ω
Maximum SPL 136dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 8.0dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 15dB-A
Power Options +48V phantom power
Weight 110.00gm
Dimensions 145.00mmH x 20.00mmW x 20.00mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration here