Features and Functions:
1. Connect the power supply and motor, insert receiving machine, and then there will arise a sound of "DO" which means the ESC has been powered on.
2. If in the center position, the motor immediately sent DO BE MI.
If the level is not in the center, the motor will come up a sound of DO, DO.
To prompt the user, until the user mediate to center position, DO would stop and immediately issued DO BE MI.
Center of a learning finished and start working.
3. The state of the LED, the remote control is in a central location, the LED turn on or off, if go on or back, LED light would be full on, LED flickers when no signal state.

Specifications:
Operating voltage: 3.0 V - 9.4 V
The input signal types: PPM
Driving frequency: 2 KHZ

Item Output current
Continuous 20A
30 seconds 25A
5 seconds 50A
Instantaneous current 80A

Weight: 11 g (including wire and plug)
Size: 30 X 23 X 5 mm/1.18"X0.98"X0.2" (length X width X thickness)
Remarks: (Line on the JST) the red is positive, black is the cathode
1 X 3 p line black (cathode), red (the anode).The white line (Signal)

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures. Thank you!
2. Please forgive 1 cm/0.39"-3 cm/1.18" measuring deviation due to manual measurement.
3. Very welcome to contact our dear customer service staff if you would like to know more about our products!