Neat Acoustics IOTA ALPHA Loudspeaker
The original Iota loudspeaker has been a huge and continuing success since its appearance in 2011, and the idea of a low-down floor standing version has been mooted ever since. All that was necessary for the new model was to retain the exceptional abilities of the Iota and build on these in a floor-standing configuration. This is easier said than done, of course. But the Neat Acoustics Iota ALPHA delivers completely on target.

The crossover is a simple two-and-a-half-way design, employing 1st & 2nd order slopes. The crossover components are all hard-wired, with point-to-point connections in order to maximize integrity. The crossover components are of premium audiophile quality and include polypropylene capacitors and low-dcr air-core inductors.

At a mere 45cm tall the Iota ALPHA can be placed discreetly in the room, yet it delivers a genuine full-range musical experience on a scale that suggests a far bigger (and more expensive) loudspeaker.

Visually deceptive, the Neat Acoustics Iota Alpha required some unorthodox Imagineering. The basis of the original Iota (the main drive unit and the EMIT type planar magnetic tweeter) is housed in the top section of the cabinet, in a sealed volume, angled upwards. This section is configured as a two-way closed box loudspeaker. The whole of the ported lower section is dedicated to augmenting the lower frequencies, via a downward-firing 134mm drive unit mounted on the bottom panel.

Finishes
The Neat Acoustics IOTA ALPHA is available in four finishes:

Natural Oak
Black Oak
American Walnut
Satin White

About Neat Acoustics
For over twenty years Neat loudspeakers have been hand crafted by a dedicated team based in Teesdale in the north of England. These loudspeakers are widely considered to offer the very best in High-End audio reproduction, regardless of size or price.

An equally dedicated group of distributors and dealers around the world can also demonstrate why, if it’s the ultimate musical experience you seek, Neat is the perfect choice.

Specifications

Description: Three-way, ported, floorstanding loudspeaker.
Drive-units: 2"-high planar-magnetic tweeter, 4" plastic-cone mid/bass driver, 5.5" down-firing paper-cone woofer.
Crossover frequencies: 80Hz, 5kHz.
Frequency range: 33Hz–22kHz.
Sensitivity: 86dB/W/m.
Nominal impedance: 4 ohms.
Dimensions: 17.6" (450mm) H by 7.8" (200mm) W by 6.25" (160mm) D.
Weight: 15 lbs (6.8kg).