ชุดที่สามารถตัดได้ตามความยาวที่ต้องการเพื่อทำแคลมป์ยึดท่อขนาดต่างๆ
สายรัดทำจากสแตนเลสที่ทนทาน

■ ข้อมูลสินค้า
・ ความยาวสาย : 3 ม.
・ ความกว้างวง : 8 มม.
・ ความกว้างน็อตยึด : 1/4 นิ้ว
・ มุมแนะนำ : SL6
・ เส้นผ่านศูนย์กลางของท่อนอก : 20 มม. หรือมากกว่า
・ วัสดุ : สแตนเลส


hose clamp set 8mm
Can be cut and used! Horse band!

■ Product description:
・ A set that can be cut to the required length to create hose clamps of various sizes.
-The band is made of durable stainless steel.
・ [How to make] ① Cut the band with nippers, etc., which is about 50 to 70 mm longer than the outer diameter of the object. (2) Pass the band through the hole under the front of the screw part, and hook the groove at the end of the band on the protrusion at the end of the thread. (3) Insert the end of the band on the opposite side into the g under the screw behind the screw, and turn the screw clockwise. When the band is pulled in and the band comes out on the other side, it is complete.
How to use: ・ Cut the band 5 to 7 cm longer than the outer diameter of the object. -Pass the band through the hole under the screw part of the clamp, and hang the groove of the band on the protrusion in the hole on the opposite side. -Put the other side of the band into the g under the screw and tighten the screw, and the band will be pulled in and the band will come out from the screw side.

■ Product specifications:・
Specifications:
・ [Incorporation details]
・ Band x 1
・ Clamp x 8
・ [Common specifications]
・ Band total length: 3m
・ Band width: 8mm
・ Clamp nut width across flats: 1 / 4inch
・ Recommended driver size: SL6
・ plicable hose outer diameter: φ20mm or more
・ Material: Stainless steel

■ Notes:
* It may not be possible to fully tighten the object if it is φ20mm or less.