HDTV Over Ethernet is based on TCP/IP standard. It transmits your HD display with the high resolutions up to 120 meters away from your HDTV or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standardyou can extend your HD video to multiple displays by using an Ethernet Switch.



HDTV Resolutions

480p,576p,720p,1080p

Audio

Sample rate:32kHz,44.1kHz,48kHz

IR remote control

38kHz;NEC

HDTV

HDTV 1.3

HDCP

HDCP 1.2

Power adapter

Input100V-240V(50-60Hz) Output:5V/1A

Power consumption

HDTV Sender:3W HDTV receiver:3W

Size(L-W-H)

92x79x20mm

Weight

240g x 2

Operating Temperature/Humidity

0-70/10%-80%RH(no condensation)

Storage Temperature/Humidity

-10-80/5%-90%RH(no condensation)



Specifications

Ø Following TCP/IP standard.

Ø Support HDMI1.3 protocol.

Ø HDCP1.1 & 1.2 protocol compliant

Ø Support point-to-point mode, one point-to-many mode and cascade connection mode.

Ø Support IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.

Packing contents:

1) Main unit No. 1 Sender , Main unit No. 2 Receiver

2) Two pieces of 5V DC Power Supply.

3) one piece of IR transmitter and one piece of IR receiver

4) User’s Manual

5V/1A

Supply power for the Transmitter

Reset

Hold down the key,the model will re-start

IR-out

Connect IR transmitter this Port

HDTV-in

Connect HDTV sink source to this Port



HDTV Receiver



5V/1A

Supply power for the Receiver

Reset

Hold down the key,the model will re-start

IR-in

Connect IR Receiver this Port

HDTV-out

Connect HDTV sink device to this Port



Connection and operation

1) Connect the HDTV source (such as DVD, PS3, STB ) to the HDTV IN of Sender.

2) Connect the IR sender to the Sender IR OUT Port, and Be Directed at HDTV video source’s IR receiver.

3) Connect the HDTV out of Receiver to HDTV display.

4) Connect the IR receiver to the Receiver IR IN Port.

5) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.

6) Plug two pieces of 5V power supply into the Sender and Receiver.

7) Power on the HDTV display and HDTV source.