DBX DRIVE RACK PA2 ไม่แถมไมค์RTA

All New Setup Wizard
Streamlined AutoEQ™
All New AFS™ (Advanced Feedback Suppression)
Mobile Control (Android®, iOS®, Mac®, Windows®)
dbx Compression
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ) Input
Subharmonic Synthesis
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings) Output
dbx Limiting
Driver Alignment Delays

Input : (2) line inputs. (1) RTA Mic input
Input Connectors : (2) Female XLR line inputs. (1) Female XLR RTA Mic input
Input Type : Electronically balanced/RF filtered
Input Impedance : >50 kohm
A/D Converter : dbx Type IV™ Conversion System
CMRR : > 45dB
Mic Preamp Phantom Power : +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN) : < -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output : (6) Line Outputs
Output Connectors : Male XLR
Output Type : Electronically balanced, RF filtered
Output Impedance : 120 Ω
Max Output : +20dBu
A/D Dynamic Range : 112 dB A-weighted, 110 dB unweighted
Type IV Dynamic Range : 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material,
unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
Alignment Delay : 10ms per channel (60ms total)
Sample Rate : 48kHz
Dynamic Range : >110 dB A-weighted, >107dB unweighted
THD+Noise : 0.003% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response : 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk : < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage : 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption : 22 W
Unit Weight : 5.25 lbs. (2.4 kg)
Shipping Weight : 6.75 lbs. (3.1 kg)
Dimensions : 1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
D/A Dynamic Range : 112 dB A-weighted, 110dB unweighted