*【Single-disk NVME hard disk enclosure（NO Offline Clone）】
Product description
Convert NVMe M.2 SSD to USB 3.1 and use as an external drive

The SSD docking base is a USB 3.1 conversion adapter that allows users to insert NVMe M.2 devices vertically. No mounting screws or attachments are necessary, simply insert the NVMe M.2 device and connect the USB cable, and you can start using immediately. This product is ideal for those who have multiple NVMe M.2 SSDs that need to be frequently re-connected or used in the short run.

Designed Exclusively for NVMe M.2 SSD
Supports the non-volatile memory express (NVMe) SSD, a PCI Express storage standard The connector standard adopts M.2. Compatible with all sizes of NVMe M.2 SSD. (Type 22110/2280/2260/2242/2230). Does not support M. 2 SSD SATA protocol. Does not support M.2 SSD of AHCI standard.


Because the NVMe M.2 SSD gets hot during operation, it comes with an aluminum heat sink and heat sink silicon pad for heat dissipation. Even if a heat sink is attached, the temperature of the entire operating SSD may exceed 60 ° C. Do not touch the SSD during operation.

USB 3.1 (Gen 2) Type-C Interface
The docking bay utilizes the USB 3.1 (Gen2), Type-C interface which supports high-speed transfer rates of up to 10 Gbps.

【Dual-disk NVME hard drive enclosure】
*Offline copy, no need to connect to a computer, file data, audio and video data, one-click offline copy, easy operation.
*Support most PCIe NVMe M2 M Key SSD.Plug and play, no drivers needed.
*Supports hard drives up to 8TB. Reads two hard drives simultaneously
*Stereo solid-state hard disk box offline clone base, fast heat dissipation, better protection of hard disk ·Achieving 10Gbps USB data transition from NVM Express PCI-e SSD to host PC, and NAS disk station. Pushing USB3.1 Gen2 to its limit, R/W speed up to 992MB/s with most NVMe NGFF.
[SSD whole copy function without PC]

SSD copying (cloning) is possible at the push of a button without using a personal computer.
[Easy operation]
Plug & play, hot plug compatible, no driver required.
[Excellent heat dissipation]
3D naked heat dissipation, can be used for a long time.

please note:
1. Do not connect to the computer during use.
2. SSD condition: If there is a bad sector in the SSD, copying may stop. Scan the SSD once before copying to make sure there are no bad sectors.

One click clone operation procedure:
1. Insert the target disk into the hard disk slot (target disk capacity ≥ original disk capacity).
2. Insert the original disk into the hard disk slot.
3. Connect the power adapter.
4. Press the power switch.
5. Press and hold the clone button for 3 seconds. The light flashes.
6. The indicator light shows the copy progress (25% -50% -75% -100%), and the copy complete indicator light turns on.

[Type c to c high-speed transfer]
-Supports transfer speeds of up to 10 Gbps (theoretical value) when using Type c to c connection. USB 2.0 is backward compatible.
- Higher speed transfer can be expect