Number of output points 16 points
Isolation method Photocoupler
Rated load voltage 12/24VDC
Operating load voltage range 10.2 to 26.4VDC (ripple ratio: within 5%)
Max. load current 0.5A/point, 3.6A/common
Max. inrush current 1.0A, 10ms or less
Leakage current at OFF 0.25mA or lower
Max. voltage drop at ON 0.3VDC or lower (TYP.) 0.5A, 0.6VDC or lower (MAX.) 0.5A
Output type Sink type
Protection function Overload protection, overvoltage protection, overheat protection
Response time
OFFON 0.5ms or less
ONOFF 1.5ms or less (resistive load)
External Power supply for
output part
Voltage 10.2 to 26.4VDC (ripple ratio: within 5%)
Current 30mA or lower (TYP. 24VDC/common), excluding external load current
Surge suppressor Zener diode
Wiring method for common 16 points/common (1-wire, terminal block type)
Number of occupied stations 32-point assignment/station (16 points used)
Module power supply
Voltage 20.4 to 26.4VDC (ripple ratio: within 5%)
Current 50mA or lower (at 24VDC and all points ON)
Noise immunity
Noise voltage 500Vp-p, noise width 1μs,
noise frequency 25 to 60Hz (DC type noise simulator condition)
Withstand voltage 500VAC for 1 minute between all DC external terminals and ground
Insulation resistance
10M or higher between all DC external terminals and ground (500VDC
insulation resistance tester)
Protection degree IP2X
Weight 0.18kg
External
connection
system
Communication part,
module power supply part
7-point two-piece terminal block
[Transmission circuit, module power supply, FG]
M3×5.2 screw (tightening torque range: 0.59 to 0.88N•m)
Applicable solderless terminal: 2 or less
I/O power supply part,
I/O part
18-point direct-mount terminal block
[I/O power supply, I/O signal]
M3×5.2 screw (tightening torque range: 0.59 to 0.88N•m)
Applicable solderless terminal: 2 or less
Module mounting screw
M4 screw with plain washer finished round
(tightening torque range: 0.78 to 1.08N•m)
Mountable with a DIN rail in 6 orientations
Applicable DIN rail TH35-7.5Fe, TH35-7.5Al (compliant with IEC 60715)
Applicable solderless terminal
 RAV1.25-3 (compliant with JIS C 2805)
[Applicable wire size: 0.3 to 1.25mm2 (22 to 16 AWG) stranded wire]
 V2-MS3, RAP2-3SL, TGV2-3N
[Applicable wire size: 1.25 to 2.0mm2 (16 to 14 AWG) stranded wire]
Wire Material Copper
Temperature rating 75°C or more
Accessory User’s manual