AUDIX TM1 | ไมโครโฟน Condenser Instrument Microphone
ไมโครโฟน AUDIX TM1 เป็นไมค์แบบคอนเด็นเซอร์ ใช้สำหรับการตรวจวัดค่าการตอบสนองความถี่ทางด้านเสียงภายในห้อง, งานบันทึกเสียง, งานแสดง โดยผ่านซอฟต์แวร์คอมพิวเตอร์ มีรูปแบบการรับเสียงแบบ Omnidirectional, Wide Linear Frequency, Well Suited for Analyzers, Switchcraft XLR Output

The Audix TM1 Test & Measurement Microphone features a 6mm pre-polarized condenser element with a wide, linear and accurate frequency response for test and measurement analysis, acoustic calibration, real-time analyzers, ambient room capturing and more.

The TM1 features a flat frequency response of 20Hz to 25kHz for accurate reproduction and pristine detail. Its 6mm capsule features an omnidirectional polar pattern with a linear response at the direct and off-axis sections of the microphone. The TM1 is features a 4-plate brass construction, switchcraft XLR output, nickel plate finish and shock absorbent o-rings.

Features:
Omnidirectional condenser microphone
for acoustic measurement
Extremely flat frequency response from 20Hz-25kHz
Features a heavy-duty snap to fit mic clip
USA-made with a 3-year warranty
Requires +48V phantom power
Specifications
Transducer Pre-polarized condenser
Frequency Response 20Hz to 25kHz +/-2dB
Polar Pattern Omnidirectional
Output Impedance 200 Ohms
Sensitivity 6.5mV / Pa @ 1k
Max Input Sound Level (SPL) 130dB with distortion < 1%
140dB Max
Signal-to-Noise Ratio 66dB
EIN 28dB (A weighted)
Dynamic Range 112dB
Connector Switchcraft male XLR
Power 18-52 volts phantom
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Housing 4 piece precision machined brass
Finish Nickel
Length 5.9″ (150mm)
Packaging Info
Package Weight 0.6 lb
Box Dimensions (LxWxH) 8.8 x 4.4 x 2.7″