PreSonus PRM-1 Precision Reference Microphone
What makes the PRM1 different from most mics?

Unlike mics you use for recording and live sound, the PRM1 has a narrow dynamic range, since it is intended to receive test frequencies, such as pink noise, at a fixed level. As a result, it is not recommended for recording or performance—but it’s the right mic for analyzing a sound system’s performance. The PRM1 exhibits linear (“flat”) frequency response between 20 Hz and 20 kHz, meaning it captures all frequencies equally within that range. Since it neither boosts nor cuts frequencies, it doesn’t color the sound, making it ideal for measuring what a room or speaker is doing to a sound system’s outgoing signal.

Designed for use with Smaart and other audio analysis tools.

While the PRM1 can be used for a variety of measurement applications, such as MLSSA™, Spectrafoo™, and TEF™, it is especially recommended for use with the Smaart® System Check wizards that are integrated into PreSonus® UC Surface control software for StudioLive® AI and StudioLive RM mixers. With this combination, you can have a complete, powerful, and affordable, audio-analysis and correction system.

Features

¼-inch, pre-polarized electret-condenser capsule
Linear frequency response between 20 Hz and 20 kHz
Omnidirectional polar pattern
Low noise, low distortion
All-metal chassis
Comes with a clip, foam windscreen, and hard case
High-quality components and rugged construction
Suitable for system analysis and measurement
Especially recommended for use with PreSonus® StudioLive® mixers and VSL with Smaart® Measurement Technology


Specifications

General

Type Black electret condenser
Element Pressure, FET preamplifier
Polar Pattern Omnidirectional
Performance

Frequency Response 20 Hz to 20 kHz
Sensitivity (@ 1 kHz open-circuit voltage) -37 dB/Pa (14 mV/Pa) 1 Pa=94 dB SPL
Rated Impedance 200Ω
Minimum Load Impedance 1,000Ω
EIN (A-weighted) 26 dB
Max. SPL (1 kΩ load) 132 dB SPL (THD ≤ 1%, 1 kHz)
Dynamic Range (1 kΩ load) 106 dB
S/N Ratio 70 dB
Connections

Polarity
Pin 2 output positive voltage (relative to Pin 3) when diaphragm receives positive pressure (moves inward)

Connector 3-pin XLR Male
Power

Phantom Power 9-52V
Current Consumption 2 mA
Physical

Length 7.56” (192 mm)
Width 0.83” (21 mm)
Weight 5.3 oz (150g)
Finish Metal, matte black
Environmental Conditions 10-50˚ C, humidity 0-95%