Product attributes:
Brand: ENLEE
Size: 280*265mm
Weight: 25g
Material: PP / thermoplastic resip(p), fexible Performance is very good, will not break
Applicable models: AM DH FR ENDURO Front and rear wheels
Upgrade:can fit the rear fork bridge fork

Feature:
1.Installed on the front fork shoulder, can be well Protected before The inner tube is at least the fork sand hit, prevent scratches in the tube. Mud and rain stops can effectively stop the splash To prevent mud, rain, goggles, guaranteeClear vision, improvethe odds.
2.Mounted on the rear fork to withstand the sand and the rear wheel. Sand, gravel, and friction frame. Can also effectively block the fly Splash debris after reaching the liner and turn point.

Fender installation:
1.A front fork fork bridge, Fender installation
The four hole is fixed on the front fork fork bucket with tie on, Two holes are fixed on the fork bridge.
2. The front wheel fendre installation
Four holes are fixed on the rear fork of the bicycle frame, Two holes are fixed on the frame of the fork to strengthen the.
3.Installation experience
The first tie with all pre fixed, and then slowly tighten, Determine the final location, and then tighten.