**สินค้าจะพร้อมส่งช่วงกลางเดือน กย.**


✅รับส่วนลด 10% สูงสุด 1000บาท กรอก 10DDXOCTW5
✅รับเงินคืน 15% สูงสุด 1000coin กรอก 15CCBOCTW5
📅 วันนี้ - 05 พ.ย. 2023 เท่านั้น ชุดไวเลสสำหรับเปลี่ยนไมโครโฟนธรรมดาให้เป็นไมโครโฟนแบบไร้สาย เหมาะสำหรับไมโครโฟนแบบไดนามิคทั่วไป มาพร้อมระบบ Digital 2.4GHz ความละเอียดเสียงที่ 24-bit / 48kbps หมดปัญหาเรื่องคลื่นที่จะเปลี่ยนไม่คงที่ แบตเตอรี่สามารถใช้งานต่อเนื่องได้ 5 ชั่วโมง เป็นแบบ Recharge ผ่านทางสาย Micro USB

Xvive U3

Features :
2.4GHz band is optimal for Microphone wireless, approved for use in Europe, South America, Asia and Australia.
Working With XLR dynamic microphone and battery-powered condenser microphones.
Less than 5ms Latency, Simultaneous broadcasts on 6 channels
Broad 20Hz - 20KHz frequency response
5 hours of battery life (Rechageable battery for both Transmitter & Receiver)
Up to 90 feet (actual range depends on rf signal absorption, reflection and interference )
High Resolution 24-bit / 48kbps Audio
Dynamic Range is 110dB
Signal to Noise Ratio is 110dB
U3 wireless aims to take the complexity, frustration, out of traditional wireless microphone system. Creating a flexible,
all-in-one solution that make any your favorite microphone into wireless.
Specs :
Wireless 2.4 GHz
Tuning Bandwidth 2400 to 2483.5 MHz
Frequency Response 20 Hz to 20 kHz (-3 dB)
Latency <5 ms
Channels Up to 6 simultaneous channels
Range Up to 90′ / 27 m
Audio High Resolution 24-bit / 48 kb/s
Dynamic Range 110 dB
SNR 110 dB
RF Sensitivity -88 dBm
Total Harmonic Distortion 0.2%
RF Output Power 10 mW E.I.R.P. max
Ports Transmitter: 1 x XLR male input
1 x USBReceiver: 1 x XLR female output
1 x USB
Maximum Input Level Mic Mode: 2.8 V p-p
Line Mode: 7 V p-p
Maximum Output Level 2.8 V p-p
Gain Adjustment Range Mic: 0 dB
Line: -10 dB
Antenna Type 1/4 Wave Sleeve Dipole, non-removable on transmitter and receiver
Antenna Impedance 50 Ohms
Impedance Transmitter: 15 kOhms, 1 kHz
Receiver: 470 Ohms, 1 kHz
Battery 3.7 V rechargeable Li-ion, 860 mA for transmitter and receiver
Rechargeable Battery Life 5 hours
Operating Temperature -0.4 to 134.6°F / -18 to 57°C
Housing Molded plastic and cast metal
Dimensions Transmitter: 1.2 x 1.1 x 3.9″ / 3.1 x 2.9 x 9.8 cm
Receiver: 1.2 x 1.1 x 3.9″ / 3.1 x 2.9 x 9.8 cm
Weight Transmitter: 3.3 oz / 93 g
Receiver: 3.2 oz / 92 g

Xvive U3D Dual Plug-On Wireless Audio System for Dynamic Microphones

Key Features
For Two Dynamic Microphones
For Two Active Monitor Speakers
Up to Six Simultaneous Systems
20 Hz to 20 kHz Frequency Response
Use a pair dynamic microphones at the same time or send audio to active speakers with the Xvive U3D digital wireless audio system. Operating in the 2.4 GHz wireless band, with a 20 Hz to 20 kHz frequency response and less than 5 ms latency, the U3D can be used by presenters, performers, and DJs for a wide variety of applications.
System
Wireless Technology Digital 2.4 GHz
Number of RF Channel Frequencies 6
Included Transmitters 2 x Plug-On
Diversity Non-Diversity
RF Frequency Band 2400 to 2483.5 MHz
Max Operating Range 90′ / 27.4 m (Line of Sight)
Max Transmitters per Band 6
Built-In Recorder No
Timecode Support No
Control App Support No
Latency 5 ms
Dynamic Range 110 dB
Encryption None
Receiver
Receiver Type Plug-In
Mounting Options Plug-In (with Included Hardware)
Antenna 2 x 1/4 Wave Sleeve Dipole, Fixed
Number of Audio Channels 1
Audio I/O 1 x XLR TRS Male Balanced Mic/Line Output
Audio Output Level 2.8 V p-p
Phantom Power Protection None
Frequency Response 20 Hz to 20 kHz -3 dB
Network I/O None
Network Protocols None
Word Clock I/O None
USB/Lightning Connectivity 1 x Micro-USB Female (Charging)
Standalone Audio Interface Capable No
Impedance XLR Output:
470 Ohms (Balanced)
Antenna:
50 Ohms
Approximate RF Sensitivity -88 dBm
Power Requirements Battery
Battery Type 1 x Built-In Rechargeable
Internal Battery Capacity 860 mAh
Battery Charging Time 2.5 Hour
Approx. Battery Life 5 Hour
Display & Indicators 3 x LED (Battery Status, Channel, Power, Sync)
Housing Metal, Plastic
Dimensions 1.2 x 1.1 x 3.9″ / 31 x 29 x 98 mm
Weight 0.2 lb / 92 g
Transmitter
Transmitter Type Plug-On
RF Output Power 10 mW (EIRP)
Audio I/O 1 x XLR TRS Female Balanced Input (Lockable)
Included Cable Connector None
Pad None
Muting None
Audio Input Level 2.8 V p-p (Mic Level)
7 V p-p (Line Level)
Auto-Level Control No
Gain Range 0 / -10 dB
Signal Processing None
Frequency Response 20 Hz to 20 kHz -3 dB
Sync Method Manual
Antenna 1 x 1/4 Wave Sleeve Dipole, Fixed
Approximate RF Sensitivity -88 dBm
Power Requirements Battery
Battery Type 1 x Built-In Rechargeable
Internal Battery Capacity 860 mAh
Battery Charging Time 2.5 Hours
Approx. Battery Life 5 Hours
USB/Lightning Connectivity 1 x Micro-USB (Charging)
Display & Indicators 3 x LED (Battery Status, Channel, Power, Sync)
Housing Metal, Plastic
Dimensions 1.2 x 1.1 x 3.9″ / 31 x 29 x 98 mm
Weight 3.3 oz / 93 g