EASY TOOL ชุดถอด และใส่ลูกหมากรถยนต์ 21 ชิ้น / EASY TOOL - 21-Piece Universal Ball Joint auto Repair Tool - Bushing Removal Adapter - Brake Anchor Pin Removal Set

- ใช้ได้กับรถ รถตู้ และรถกระบะ
- ใช้ถอด และติดตั้ง เบรค แองเคอร์ พิน
- ชุดรรวม C-frame สกรู อะแดปเตอร์ติดตั้ง และอะแดปเตอร์ถอด
- กล่องบรรจุช่วยให้สะดวกในการเคลื่อนย้าย และจัดเก็บ

1.3 kg.
39 x 49 x 10 cm.

ชุดประกอบด้วย
1 x Center Plug: OD 7/8"
1 x "C" Frame Press
1 x "C" Frame Screw
1 x Install Adaptor
1 x Remover Adaptor C-frame.
1 x Receiving tubes 1-3/4 x 2. 2-1/4 x 2 -1/2. 2-3/4 x 3.
1 x Receiving tube OD:2 -12 IO: 2 -14 L: 2.
1 x Receiving cup adaptor OD: 2-1/4 IO: 2 L 2.
1 x Receiving cup OD: 2-1/8 IO: 1-3/4 L 1/2.
1 x Remover installer OD: 1-7/16 IO: 3/4 L I.
1 x Receiving cup OD 2-1/2 IO 1-1/4 L 1-1/2.
1 x Receiving tube OD: 2-3/4 IO:1-7/16 L 2-1/4.
1 x Receiving tube OD: 3 IO: 2-3/4 L 2-1/4.
1 x Receiving cup OD 2-1/4 IO 2 L 2.
1 x Receiving tube OD: 2-1/2 IO: 2-1/4 L 2 -3/4.
1 x Installation cup OD: 2 IO: 1-/34 L 2-5/16.
1 x Receiving cup OD 2-7/8 IO 2-5/8 L 3-7/8.
1 x Receiving cup OD 2-7/16 IO 2-3/16 L 3-3/16.
1 x Installation cup OD: 2 IO: 1-/34 L 3.
1 x Blow carry case
EASY TOOL - 21-Piece Universal Ball Joint auto Repair Tool - Bushing Removal Adapter - Brake Anchor Pin Removal Set

- C Frame press removes, and replaces joints from most vehicles
- Include receiver tubes, removing / installing adapters
- For removal and installation of ball joints
- Brake anchor pin removal and installation
- Includes C-frame, forcing screw, installation adapter, removal adapter, installation cups, removal cups, and receiving tubes
- Blow molded case to organize, and transport the tool

1.3 kg.
39 x 49 x 10 cm.

Set includes:
1 x Center Plug: OD 7/8"
1 x "C" Frame Press
1 x "C" Frame Screw
1 x Install Adaptor
1 x Remover Adaptor C-frame.
1 x Receiving tubes 1-3/4 x 2. 2-1/4 x 2 -1/2. 2-3/4 x 3.
1 x Receiving tube OD:2 -12 IO: 2 -14 L: 2.
1 x Receiving cup adaptor OD: 2-1/4 IO: 2 L 2.
1 x Receiving cup OD: 2-1/8 IO: 1-3/4 L 1/2.
1 x Remover installer OD: 1-7/16 IO: 3/4 L I.
1 x Receiving cup OD 2-1/2 IO 1-1/4 L 1-1/2.
1 x Receiving tube OD: 2-3/4 IO:1-7/16 L 2-1/4.
1 x Receiving tube OD: 3 IO: 2-3/4 L 2-1/4.
1 x Receiving cup OD 2-1/4 IO 2 L 2.
1 x Receiving tube OD: 2-1/2 IO: 2-1/4 L 2 -3/4.
1 x Installation cup OD: 2 IO: 1-/34 L 2-5/16.
1 x Receiving cup OD 2-7/8 IO 2-5/8 L 3-7/8.
1 x Receiving cup OD 2-7/16 IO 2-3/16 L 3-3/16.
1 x Installation cup OD: 2 IO: 1-/34 L 3.
1 x Blow carry case

How to Use
- Assemble the ball joint press over the control arm
- Select the correct size receiving tube, and position it under the vehicle ball joint
- Tighten the forcing screw until the receiving tube contacts the control arm
- Check the alignment of all tooling and component
- Continue tightening the forcing screw until the ball joint is removed

Installation
- Clean the control arm and coat the I.D. with a suitable lubricant
- Insert the replacement ball joint as straight as possible into the vehicle control arm
- Assemble the ball joint press components
- Position the receiving tube, and tighten the forcing screw
- Check the alignment of all tooling and component
- Continue tightening the forcing screw until the ball joint is firmly seated