-----------------------------ยินดีต้อนรับสู่ร้าน . . . allinit-----------------------------------
1⃣มีปัญหาไม่ต้องห่วงโปรดปรึกษาเรา , คุณจะไม่สูญเสียใดๆ

2⃣การซื้อสินค้า→สนใจให้เรา→ก่อนจัดส่ง
-------------------------------------------------------------------------------------------------
1. [Durable Construction]‑ heater uses high quality NI CR heating wire, which is stable and power saving, durable and not affected by magnetism, faster heating speed, explosion proof, plastic can well guard the quartz tube and prevent fish from being scalded.
2. [ Temperature Display]‑Fish tank water heater HD control display, real time monitoring of fish tank status, 20 ℃ to 34 ℃ (68℉ to 93.2℉) cycle temperature control, convenient and fast. Note: The controller is not , please keep it away from water.
3. [800W Fast Heating]‑When the heating rod starts to work, the machine instantly heats with 800W high power, until it is close to the set temperature, it starts to maintain a constant temperature with low power, which saves energy and saves electricity.
4. [Working Status]-When out of the water, screen will display L1, with a flashing reminder and stop working, built in smart , if it cant detect the water will turn off; when the heating rod is in working state, the red light will be on; When stopped, the blue light turns on.
5. [Simple Installation and Easy Operation]‑This 800W heating rod is suitable for below 400L (106 gallons) water volume and below 47.2in fish tank. Fish tank heating rod is applied for aquaculture, glass containers, and hydroponic systems.

Specification:
Item Type:  Heater
Material: Plastic, Quartz Glass
Application: Heating Water in Fish Tank
Suitable Water Volume: Below 400L / 106 gallons
Suitable for Fish Tank Size: Below 120cm / 47.2in

How to Use:
1. When the power is off, put the heating rod into the water, completely immerse the whole body in the water, plug in the power supply, and set the temperature.
2. Place the heating rod as much as possible in the position where the water circulates, so that the heat circulates into the water in the tank.
3. It is forbidden to insert the heating rod into the sand and mud at the bottom of the tank to prevent unnecessary trouble caused by burning the rod.
4. Because the water disconnecting power‑off induction device is located on the upper half of the heating rod, it is forbidden to install the rod body upside down, with the head facing down and the heat facing upwards to avoid the situation that the heatis exposed to the water due to lack of water, and continues to heat to cause damage.
5. The temperature setting button in the middle of the power cord needs to be exposed to the outside of the water. Beware of water damage.

Package List:
1 x Heating Rod
2 x Suction Cup
1 x Manual