X3 Series 2
Elegant, efficient, uncompromised. The Michi X3 Series 2 Integrated Amplifier combines 350 Watts of robust Class AB output power and an 8-Channel ESS SABRE Digital to Analog converter to deliver a refined and expansive performance. Analog RCA, XLR, Moving Magnet Phono, aptX™ HD Bluetooth, Coaxial, Optical, and PC-USB rendering MQA are all supported.

Michi, expectations amplified DIMENSIONS (W × H × D)485 x 150 x 452mm
19" × 6" × 17 3/4" FRONT PANEL HEIGHT132 mm (5.25") POWER REQUIREMENTS120V, 60Hz POWER CONSUMPTION500W STANDBY POWER CONSUMPTIONNormal: <0.5WNetwork Wakeup: <2W NET WEIGHT28.9kg (63.7 lbs.) MAXIMUM POWER OUTPUT350W/Ch (4Ω) CONTINUOUS POWER OUTPUT200W/Ch (8Ω) TOTAL HARMONIC DISTORTION (THD)<0.008% FREQUENCY RESPONSE
Line Level Inputs: 10Hz - 100kHz (+0dB, -0.4dB)Digital Inputs: 20Hz - 20kHz (0 ± 0.4dB)Phono Input: 20Hz - 20kHz (+0dB, +0.4dB) S/N RATIO (IHF "A" Weighted)
Line Level Inputs: 102dBDigital Inputs: 102dBPhono Input: 80dB More Specifications
INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
<0.03%

DAMPING FACTOR (20Hz - 20kHz, 8Ω)
350

CHANNEL SEPARATION
>55dB

INPUT SENSITIVITY
Line Level Inputs (RCA): 340mV
Line Level Inputs (XLR): 540mV
Phono Input (MM): 5.2mV

INPUT IMPEDANCE
Line Level Inputs (RCA): 100kΩ
Line Level Inputs (XLR): 100kΩ
Digital Inputs: 75Ω
Phono Input (MM): 47kΩ

INPUT OVERLOAD
Line Level Inputs (RCA): 3.5V
Line Level Inputs (XLR): 5.5V
Phono Input: 60mV

PREOUT LEVEL
1.9V

OUTPUT IMPEDANCE
100Ω

TONE CONTROLS
±10dB at 100Hz / 10kHz

COAX/OPTICAL DIGITAL INPUT SIGNALS
SPDIF LPCM (Up to 24-bit/192kHz)

PC-USB
USB Audio Class 1 (up to 24-bit/96kHz)
USB Audio Class 2 (up to 24-bit/384kHz)*
*Driver installation required
DSD and DoP support
MQA and MQA Studio support
Roon Tested support