Specification:
New and high quality
Block : synchronous rectifier non isolated step-down constant current constant voltage module CC CV charging module
Scope of application: high-power LED constant current drive, lithium charging (including ferroelectric), 4V, 6V, 12V, 14V, 24V charging, nickel cadmium nickel metal hydride ( pack) charging, solar panel, wind turbine
Input voltage: 6-40VDC
Output voltage: conuously adjustable (1.2-35VDC), less than 32V for a long time (applicable to applications where the input voltage is higher than the output voltage, no voltage rise is allowed)
Output current: greater than 20A, within 15A for a long time (if the power tube temperature exceeds 65 degrees, please add a fan for cooling, and if the high voltage output is derated, please use it)
Current limig range: 0.2-20A (regulag) If the module exceeds 65 degrees, please add a fan.
Low pressure difference: 3V
Operag frequency: 150KHZ
Conversion efficiency: about 96% higher efficiency is related to pressure difference and service environment
Output ripple: about 50mV ripple (without noise) 20M bandwidth (for reference only) measured at 24V input
Operag temperature: - 10 ℃ to+75 ℃)
Potentiometer adjustment direction: clockwise (increase), counterclockwise (decrease)
Output short-circuit protection: with (instantaneous protection) constant current (the current set constant current value cannot be short circuited for a long time)
Input reverse connection protection: None,
Output anti backflow: None, for load with power or inductive load, 2-pole tube is required!
Wiring mode: terminal block
Module size: 60 * 53 * 30MM
Package Included：1Pc

Note:
Please refer to the measurement. Tiny measuring error is allowable in normal range.
As different computers display different colors, thank you for your understanding, the actual product color may be slightly different from the image.