OddityRC 2.5 inch lightweight cinematic whoop XI25 Pro

Compared with the old version, there are the following specific updates:
Carbon fiber plate: optimized rear arm geometry and improved strength; Widen the battery strap hole; upper plate thicken to 3mm; Optimization of chamfer process; Compatible with 26.5mm AIO mounting holes.
Printed parts: improved the accuracy, installation process is no longer difficult; Added an extra SMA antenna mount and a standard Gopro mount.
Power-lifting duct ring: The injection molding process and new materials are used, which have both strength and toughness.
Aluminum column: use customized 7075 aluminum column instead. The strength is greatly increased.

Description：
The XI-25 cinewhoop frame is the first cinematic frame launched by OddityRC. The frame body consists of two layers of carbon plates and a high-strength injection-molded duct. The appearance has an industrial aesthetic. Weve made additional enhancements to the duct, which now excels in crash protection. A injection molding duct, a 915 antenna mount, a MMCX antenna mount, a SMA antenna mount, a naked Gopro mount, a Insta360 Go mount and a EVA protection strip are included in the package.

Specification：
Wheelbase：112mm
interior height:23mm
Upper plate holes hole location:25.5mm/26.5mm
Bottom plate holes hole location:20mm/25.5mm
Motor installation:9mm/12mm
lens hole:20mm/19mm/14mm
frame weight:61g(all screws and printed parts and batt pad are included)
Upper plate thickness: 3mm
Bottom plate thickness: 1.5mm


Installation Instruction：
①The camera board needs to be inserted into the grooves in front of the upper board respectively, and then install the 20mm aluminum column to fix it (14mm or 19mm can be fixed directly by printing, no need to install the carbon board)
②After that, the flight control, motor and image transmission can be fixed on the upper board and the bottom plate in advance, and finally fixed with the circle (Note: It is recommended to flip the flight control and fix it on the upper board, and the image transmission on the lower board; before installing the flight control You need to put on the battery tie first)