DC 12V Battery Undervoltage Low Voltage Cut off Automatic Switch Recovery Module Charging Controller Protection Board
Feature:
This is an under-voltage switch module, used to turn off the power supply of resistive loads when the voltage is lower than a certain value.
When the voltage rises, the module will automatically restart the load.
The module has low power consumption less than 10mA.
The default undervoltage protection value is about 10.5V, which can be adjusted by turning the potentiometer, increasing clockwise and decreasing counterclockwise.
If the load recovers immediately after power failure, you can add a capacitor (>25V), the value of the capacitor depends on your load.

Specification:
Application: Computer
Working temperature: -40~+85 °C
Power supply voltage: 12V
Electronic products: for Arduino STM
Color: blue
Material: PCB
Size: 40mm*29mm*19mm
Product weight: 16g

Note:
The installation of electronic modules requires basic knowledge and a certain electronic professional foundation and hands-on ability.
There may be slight size deviations due to manual measurement, different measuring methods and tools.
The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.


Included:

1 X Battery Undervoltage Protection Board