✅รับส่วนลด 10% สูงสุด 1,000 บาท กรอก 10DDXNOVW2
✅รับเงินคืน 15% สูงสุด 1,000 Coin กรอก 15CCBNOVW2
📅 วันนี้ - 19 พ.ย. 2023 เท่านั้น

โค้ดพิเศษเฉพาะลูกค้า CT Music ทุกท่าน
💌 กรอกโค้ด H9GKJPAU ลด 10% ลดสูงสุด 400.- เมื่อช้อปครบ 3,000.-
💌 กรอกโค้ด 8DBG372D ลด 15% ลดสูงสุด 700.- เมื่อช้อปครบ 5,000.-

📮 โค้ดใช้ได้ตั้งแต่ 1 - 30 พ.ย. เท่านั้น!!

Finally a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz the higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit. This enables the F12-X200 to reproduce the full spectrum of audible frequencies for the most accurate output possible whatever your environment and set-up.

The F12-X200’s response is remarkably neutral with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker delivering all the physical feedback you’d expect from playing through a conventional guitar rig. It’s not just FRFR, it’s Full Range LIVE Response.

Used with amp modellers or IRs in a backline cab or a wedge monitor on stage or in the studio it doesn’t just sound like great guitar tone it feels like it too.

Specifications
12in
Diameter
8Ω
Rated impedance
97dB
Sensitivity
Nominal diameter
305mm / 12in
Power rating
200W
Rated impedance
8Ω
Sensitivity
97dB
Chassis type
Pressed steel
Magnet type
Ceramic
Voice coil diameter
2in / 51mm
Voice coil material
Round copper
Frequency range
60-20,000Hz
Resonance frequency, Fs
75Hz
DC resistance, Re
5.91Ω
8Ω Frequency Response
8Ω Frequency Response

Parameters
D
0.26m / 10.24in
Fs
69.8Hz
Mms
50.19g / 1.77oz
Qms
12.007
Qes
0.831
Qts
0.777
Re
5.91
Vas
47.3l / 1.67ft3
BI
12.5
Cms
0.103
Rms
1.834
Le (at 1kHz)
0.102mH (complete system)
Mounting Information
Cut-out diameter
283mm / 11.1in
Diameter
309mm / 12.2in
Magnet structure diameter
170mm / 6.7in
Mounting hole dimensions
7.9mm / 0.31in Ø
Mounting hole PCD
297mm / 11.7in
Number of mounting holes
8
Chassis depth (inc gasket)
98mm / 3.86in
Magnet depth
67mm / 2.64in
Overall depth
165mm / 6.5in
Unit weight
4.1kg / 9.1lb