ET120M 120MHz Bandwidth 500MS/s Sampling Rate Colorful Analog Waveform Oscilloscope Handheld Digital Oscilloscope with Backlight
Feature:
120MHz bandwidth and 500MS/s sampling rate
It is not just an oscilloscope, but also has 4 speeds of square wave signal output function(1kHz,10KHz,100KHz,1MHz)
Portable, hand-held, sufficient power can achieve 8 hours of battery life
One-key automatic measurement of waveforms, with one X1/X10 oscilloscope probe included
12 kinds of parameter measurement, Vpp, Vrms, Vavg, Vp, Vmax, Vmin,F,T,T+,T-. Du+, Du-.

Specification:
Analog bandwidth: 120MHz
Display: 320x240 LCD screen
Display area: 50mm x 40mm/1.96x1.57
Storage: 2500 DSO waveforms
Vertical resolution: 8 bits
Automatic measurement function: Vpp, Vrms, Vavg, Vp, Vmax, Vmin,F,T,T+,T-. Du+, Du-
Vertical sensitivity range: x1: 50mV/div ~ 10V/div x 10: 500mV/div ~ 100V/div
Vertical accuracy: ±(5%+ 0.2div)
Backlight: White, brightness adjustable
Impedance: x1: 1MΩ / x10: 10MΩ
Battery: 18650 lithium battery
Auto shutdown: No operation for 15 minutes
Size: 124 x 80 x 35mm/4.88x3.14x1.37
Use conditions: 0C~ +40℃; < 75%RH
Storage conditions: -10C~ +60℃; < 90%RH
Auto zero reference: During DC measurement
Trigger level: ±3.8div (0. 1div per step)
Trigger position: ± 6div (0. 1div per step)
Cursor function: V, t, 1 /t
Measurement Accuracy: ±(5%+ 0.2div)
Non. linearity: ±1 bits
Coupling method: DC/AC
Division: Vertical: ±3.8 Horizontal:12
Time base range: 6ns/div ~ 50s/div
Time base accuracy: ±(0.01%+0.1div)
Scan mode: Auto/Single/Normal
Trigger slope: Rising / Falling
Record length: 12div
Maximum real-time sampling rate: 500MS/s
Auto configuration: Automatically set time base and vertical amplitude

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.


Included:
1 X Oscilloscope
1 X Probe
1 X USB Cable
1 X User Manual
Array