Solar Lighting Induction Control Circuit Board Street LED Lamp Radar Body Sensor Module Outdoor Bulb Panel with Remote Controller
Specification:
Applied LED voltage: 2.8V-3.3V
Power: < 10w (virtual standard 60W in the market)
Solar panel maximum input : 5V-6V/<20W
Induction mode: light control induction+radar human body induction
Sensing distance: 5-10m
Induction time: highlight for 15 seconds+low light and long light
Material: ABS+PC
Circuit board size: 81.5*22.8mm/3.3X0.9in

Tips:
This control panel does not have overcharge and overdischarge protection. The battery should have its own protection board. It is compatible with 3.2V lithium iron phosphate battery and 3.7V lithium battery. It can be used for modification or maintenance of solar integrated street lamp.
Microwave induction turns on for 15 seconds and turns on slightly.
In order to transport this product conveniently, there is no battery installed in the remote control. You need to buy the AAA battery locally.
Please connect the battery first, then the LED lamp, and finally the solar panel
When using a 3.2v or 37v lithium battery, please install a protective plate on the battery to prevent overcharge and overdischarge
The surface of the patch parts should not be covered with metal. Otherwise, the sensing distance will be smaller or shorter. The sensing surface can penetrate glass or plastic

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Included:

1 x Lamp Circuit Board
1 x Remote Controller