////////////Onkyo TX-NR7100AMPLIFIER
Power output (All channels) 220 W/Ch (6 ohms, 1 kHz, 10% THD,1-ch driven) 100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2-ch driven, FTC)
Dynamic power 250 W (3 ohms, Front) 220 W (4 ohms, Front) 130 W (8 ohms, Front)
THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, half power)
Input sensitivity and impedance 200 mV rms/47 k-ohms (Line) 3.5 mV rms/47 k-ohms (Phono MM)
Rated RCA output level and impedance 1 V rms/470 ohms (Subwoofer pre-out) 200 mV rms/470 ohms (Zone 2/Zone B line-out)
Frequency response m10 Hz–100 kHz/+1 dB, -3 dB (Direct/Pure Audio)
Tone control ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble)
Signal-to-noise ratio 106 dB (Line, IHF-A) 80 dB (Phono, IHF-A)
Speaker impedance 4–16 ohms

GENERAL
Power supply AC 120 V~, 60 Hz
Power consumption (operating) 750 W
Power consumption (idle) 75 W
Power consumption (standby) 0.1 W
Dimensions (W x H x D) 17 1/8˝ x 6 13/16˝ x 14 15/16˝ (435 x 173.5 x 379.5 mm)
Weight 22.9 lbs. (10.4 kg) ////////////////////// KLIPSCH R-800F - FLOORSTANDING SPEAKER CARACTÉRISTIQUES
RÉPONSE EN FRÉQUENCE - 34Hz - 21kHz /- 3dB
SENSIBILITÉ - 98 dB (dans la pièce)
GESTION DE PUISSANCE (CONT/PEAK) - 150W/600W
IMPÉDANCE NOMINALE - Compatible 8 ohms
FRÉQUENCE CROSSOVER - 1 400 Hz
DRIVER HAUTE FRÉQUENCE - Tweeter LTS en aluminium de 1 "accouplé à un pavillon Tractrix® carré de 90 x 90
DRIVER BASSE FRÉQUENCE - Deux woofers TCP en cuivre filé de 8 "
MATÉRIAU DE LENCEINTE - MDF
TYPE DENCEINTE - Bass-Reflex via les ports Tractrix® à déclenchement arrière
ENTRÉES - Poteaux de reliure plaqués or simples
HAUTEUR POUCES (MM) - 43" (1093 mm)
POUCES DE LARGEUR (MM) - 10,9" (277 mm)
POUCES DE PROFONDEUR (MM) - 17,5" (443 mm)
POIDS DU PRODUIT LB (KG) - 54 lb (24,5 kg)
FINITION - Vinyle noir grain de bois texturé
ACCESSOIRES INCLUS - Pieds et vis moulés par injection ////////////////////// Klipsch Reference Next-Generation R-50C Product highlights:
1" LTS (Linear Travel Suspension) titanium diaphragm tweeter with Tractrix® horn
two 5-1/4" spun-copper TCP (thermoformed crystalline polymer) woofers
frequency response: 90-21,000 Hz (± 3dB)
sensitivity: 96 dB
power handling: up to 100 watts RMS
impedance: 8 ohms
sealed (acoustic suspension) enclosure allows for placement near a wall or inside an A/V cabinet
magnetic grille protects drivers and looks stylish
scratch-resistant textured wood grain vinyl finish
single gold-plated binding post speaker terminals
dimensions (measured by Crutchfield): 18-13/16"W x 7-1/16"H x 8-5/16"D
weight: 14 lbs. /////////////////// Klipsch R-50M FREQUENCY RESPONSE 58Hz - 21kHz +/- 3dB
SENSITIVITY* 92 dB (In-Room)
POWER HANDLING (CONT/PEAK) 75W/300W
NOMINAL IMPEDANCE 8 ohms Compatible
CROSSOVER FREQUENCY 1,560 Hz
HIGH FREQUENCY DRIVER 1" Aluminum LTS tweeter mated to a 90 x 90 square
Tractrix® Horn
LOW FREQUENCY DRIVER Single 5.25" spun-copper TCP woofer
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass-Reflex via rear-firing ports
INPUTS Single Gold Plated Binding Posts
HEIGHT INCHES (MM) 13.9" (354 mm)
WIDTH INCHES (MM) 7" (178 mm)
DEPTH INCHES (MM) 9" (229 mm)
PRODUCT WEIGHT LBS (KG) 11 lbs (5 kg)
FINISH Black Textured Wood Grain Vinyl
75-watt bookshelf speaker (pair) ///////////////////LIPSCH R-120SW ตู้ลำโพงซับวูฟเฟอร์ ขนาด 12 นิ้ว 400 วัตต์ มีแอมป์ในตัว FREQUENCY RESPONSE 29Hz – 120Hz +/- 3dB
MAXIMUM ACOUSTIC OUTPUT 116 dB
AMPLIFIER All Digital
AMPLIFIER POWER (CONT/PEAK) 200W/400W
AMPLIFIER FEATURES Volume, Low-pass, 0/180 phase, Auto Power On
DRIVER COMPONENTS 12” high excursion spun-copper IMG woofer
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Bass-Reflex via rear-fring port
INPUTS Line level/LFE RCA jacks
HEIGHT 16.5” (419 mm)
WIDTH 14” (356 mm)
DEPTH 19.2” ( 488mm)
FINISHES Black Textured Wood Grain Vinyl