"100% brand new and high quality
Features:
Function of temperature are as follows:
1.The automatic identification of work mode:
The system automatically according to the start/stop temperature,
identify work mode;
Start temperature > stop temperature, cooling mode C.
Start temperature < stop temperature, heating mode H.
2.Cooling mode:
When the temperature ≥ Start temperature, relay conduction,
red led on, refrigeration equipment begin to work;
When the temperature ≤ Stop temperature, relay disconnect,
red led off, refrigeration equipment stop to work;
3.Heating mode:
When the temperature ≤ Start temperature, relay conduction,
red led on, heating equipment begin to work;
When the temperature ≥ Stop temperature, relay disconnect,
red led off, heating equipment stop to work;
4.Temperature correction function OFE (-10.0 ~ 10℃):
The system is working for a long time and may be biased,
through this function correction,
the actual temperature = measuring temperature + calibration value;
How to set the start/stop temperature:
1. In the running interface, Long Press TM+ key more than 3 seconds,
into the start temperature settings interface, can be modified by TM+ TM- key,
to be modified, waiting for 6s automatic exit and save;
2. In the running interface, Long Press TM- key more than 3 seconds,
into the stop temperature settings interface, can be modified by TM+ TM- key,
to be modified after the parameters, waiting for 6s automatic exit and save;
The humidity function is as follows:
1.The automatic identification of work mode:
The system automatically according to the start/stop humidity, identify work mode;
Start humidity> stop humidity, dehumidification mode D.
Start humidity< stop humidity, humidification mode E.
2.Dehumidification mode:
When the humidity≥ Start humidity, relay conduction, green led on,
dehumidification equipment begin to work;
When the humidity≤ Stop humidity, relay disconnect, green led off,
dehumidification equipment stop to work;
3.Humidification mode:
When the humidity≤ Start humidity, relay conduction, green led on,
humidification equipment begin to work;
When the humidity≥ Stop humidity, relay disconnect, green led off,
humidification equipment stop to work;
4.Humidification correction function RH (-10.0 ~ 10%):
The system is working for a long time and may be biased,
through this function correction,
the actual humidity = measuring humidity + calibration value;
How to set the start/stop humidity:
1. In the running interface, Long Press RH+ key more than 3 seconds,
into the start humidity settings interface, can be modified by RH + RH - key,
to be modified, waiting for 6s automatic exit and save;
2. In the running interface, Long Press RH- key more than 3 seconds,
into the stop humidity settings interface, can be modified by RH+ RH- key,
to be modified after the parameters, waiting for 6s automatic exit and save;

Package includes:
1 x XY-WTH1 Digital Humidity & Temperature Controller"