------------------------------------❀ Welcome Jupiter Home ❀ ------------------------------------
❀Always provide the best products & lowest price❀
✔Ready to sent ✔High quality ✔Best price
☛Free Gifts:Follow Shop
☞PS: If you want a free gift, please send me the screenshot that you follow my shop and leave a message on your order.
------------------------------------ * Product details* ------------------------------------

Features:
Specially designed to check the compression pressure of gas in the cylinder.
Selection of premium grade material, durable and long lasting; Various specifications, complete configuration.
Double-scale pressure gauge, clear scale, with vent valve, easy to use.
Quick connector is easy to insert and remove, corner design, easy to use.
Includes multiple adapters that fit for GM, Ford, Lincoln, Isuzu, Mercedes-Benz , Kubota, Peugeot .

Specification:
Pressure Gauge Diameter: 75mm / 3inch
Measuring Range: 0-1000psi
 
Hoe to Use:
1. Start the engine and run to the normal working temperature, turn off the engine and wait for the engine to stop running, remove all the spark plugs;
2. Fully open the throttle valve and press the connector of the pressure gauge against the spark plug hole;
3. Use the motor to drive the engine to rotate at 100-150R/MIN for 3-5 seconds. At this time, the pointer on the gauge will gradually rise, and will stop when a certain value is reached. The indicated value at this time is the compression pressure of the cylinder;
4. Press the button to reset the pointer to zero;
5. Repeat the steps above for 2~3 times to improve the measurement accuracy;
6. The cylinder pressure of general cars is >0.9MPA, and

Package List:
1 x Compression Pressure Gauge
1 x Air Release Button
1 x Rubber Hose
1 x 1/8 inch NPT Quick Coupler
3 x 7/16inch-20(F) Quick Coupler
3 x M12x1.25(M) - 7/16inch-20(M) Adaptor
2 x M12x1.25(F) - M18x1.5(M) Adaptor
1 x M10x1.25 Adaptor Short (TU-15-14)
1 x M10x1.25 Adaptor long (TU-15-3A)
1 x ZG 1/8inch(M) - Male Quick Coupler
1 x ZG1/8inch(F) - M24x2(M) Adaptor (TU-15-4A)
1 x Adaptor Sleeve
1 x Quick Connect with Ball Tip
1 x 1/2inch-19 Lock Nut
1 x 7/16inch-20(M) - 7/16inch-20(F) 90°
1 x ZG1/8inch(M) - M24x1.5(M) Adaptor
1 x M10x1(M) Adaptor (TU-15-1A)
2 x Copper Washer

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

#DieselEngineCylinderPressureTester #DieselEngineCompressionTester #DieselEngineCompressionGauge #CylinderCompressionTester #CylinderCompressionGauge