////////DENON AVR-S760H Specifications
Number of Power Amps 7
Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) 75 W
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) 110 W
Power Output (6 ohm, 1 kHz, 1% 1ch Drive) 140 W
General
Speaker impedance 4-16Ω/ohms
Input sensitivity 200 mV
Frequency response 10 Hz - 100 kHz — +1, –3 dB (Direct mode)
S/N Ratio 98dB (IHF-A weighted, Direct Mode)
FM section (Tuning frequency range) 87.5 – 107.9 MHz
AM section (Tuning frequency range) 520 - 1710 kHz
Power Supply AC 230 V, 50 Hz
Power Consumption in W 400
Power Consumption No-Sound (ECO On / Off) in W 29 W / 39 W
Weight in kg 8.6
3.5mm audio line-in connection Yes
System Remote Control RC-1244
Standby Consumption in W 0.1
CEC Standby Consumption in W 0.5
Network Control On Consumption in W 2.0
Available colours: Black / Premium Silver Yes / No
Carton Maximum Dimensions (W x D x H) in Inches
Carton Maximum Dimensions (W x D x H) in mm 523 x 435 x 232 mm
Maximum Dimensions
Antenna:Horizontal:(W x D x H) in mm
( Antenna:Vertical :(W x D x H) in mm)
【 w/o Antenna :(W x D x H) in mm】 434 x 339 x 215 mm
(434 × 339 × 151 mm) /////////POLK MXT 60 SPEAKER
Width 7.5″ (19.05 cm)
Height 13″ (33 cm)
Depth 10.99″ (27.93 cm)
Weight 5.44 kg (12 lbs)
Front Array Driver Complement • (1) 1″ Terylene Dome Tweeter
• (1) 6.5″ (16.51 cm) Bi-laminate Paper Woofer
Impedance Compatible with 4- and 8-ohm outputs
Crossover Frequency 3200 Hz
Total Frequency Response 38 Hz → 40,000 Hz
Sensitivity (1 watt @ 1 meter) 87dB
Recommended Amplifier Power Per Channel 30 watts → 200 watts
Inputs 5-way nickel-plated binding posts ////////////POLK MXT30 CENTER CHANNEL SPEAKER
Qty Included 1
Width 19.9" (48.3 cm)
Height 6.50" (16.6 cm)
Depth 8.13" (20.7 cm)
Weight 13lbs (5.9 kg)
Front Array Driver Complement • (1) 1" (2.54 cm) Terylene Dome Tweeter
• (2) 5-¼" Bi-laminate Paper Woofers
Enclosure Type Rear port
Lower and Upper -3dB Limits 77 Hz → 26,000 Hz
Sensitivity (1 watt @ 1 meter) 89dB SPL
Total Frequency Response 55 Hz → 40,000 Hz
Recommended Amplifier Power Per Channel 30 watts → 200 watts
Tweeter/Midrange Crossover Frequency 2500 Hz
Inputs Single nickel-plated 5-way binding posts ////////////POLK MXT15 COMPACT BOOKSHELF SPEAKER
Qty Included Pair
Width 6.5″ (16.51cm)
Depth 7.18″ (18.24cm)
Weight 9Ibs/4.08kg
Front Array Driver Complement • (1) 1″ (2.54 cm) Terylene Dome Tweeter
• (1) 5.25″ (13.43 cm) Bi-laminate Paper Woofer
Impedance Compatible with 4- and 8-ohm outputs
Total Frequency Response 48Hz → 40,000Hz
Max Sensitivity (1 watt @ 1 meter) 86dB
Crossover Frequency 2200Hz
Mounting Type 1/4″ 20 Threaded Insert or Keyhole Hanger
Recommended Amplifier Power Per Channel 30 → 150W
Speaker Inputs (1) Pair of 5-way nickel-plated binding posts ////////////POLK HTS-10 SPECIFICATIONS
OVERALL
Total Pieces 1
Included Accessories • (1) Removable Speaker Grille
• (1) Power Cord
• (1) Quick Start Guide
• (1) Product Registration Card
Electronics Warranty 3 years
Drivers Warranty 5 years
Original Purchaser Only Yes
Carton 1
SUBWOOFER
Total Pieces 1
Height 16.614" (42.2 cm)
Width 15.118" (38.4 cm)
Depth 16.1" (40.89 cm)
Weight 37.75 lbs (17.12 kg)
Subwoofer Array Driver Enclosure Type Power Port Bass Vented
Subwoofer Array Driver Complement • (1) 10" (25.4 cm) d (Round) Polypropylene Dynamic Balance and Klippel optimized driver - Subwoofer
Peak Power 200 Watts
Continuous Power 100 Watts
Total Frequency Response 25 Hz → .180 Hz
Nominal Impedance 8 ohms
Lower and Upper -3dB Limits 30 Hz → .120 Hz
Amplifier Class Class D
Audio Inputs • LFE (Unfiltered)
• Stereo Line Level - (2) RCA
IO Button Location Back Panel
Adjusts • Volume +/-
• Low Pass Filter (30Hz-120Hz)
• Phase (0/180°)
• Power: Auto on/off
• Power: DC control (12V trigger)
US Power Cycle Energy Star Compliant with Auto Standby (.5W)