Specifications:
Type: Electric Drill Chuck
Material: Stainless steel
Quantity: 4
Size: 0.3-4mm
Chuck Clamping Range: 0.3-4mm
Body Material: Stainless steel
Color: Silver
Flexible Shaft Length: 980mm
Flexible Shaft Diameter: 9.4mm
Axis Length: 870mm
Axis Diameter: 6mm
Flexible Shaft Material: Rubber
Color: Black


Feature:
- Silver stainless steel is high in hardness and resistant to rust.
- High temperature non-heating bearing, high precision. The chuck is not used during the process.

Instructions for Use:
- When inserting, the bump on the soft shaft is aligned with the inner of the tail of the hanging mill. After the right, the force is applied, the link is hoisted, the electric grinder, and the table grinder.
- Replace the hose core; unscrew the inner screw with the hexagon socket and remove the entire shaft to replace it.

Note:
- It is forbidden to bend at an acute angle and near corner, as far as possible to bend naturally as far as possible, and the shaft of the soft shaft spring rubs the wall seriously, causing jitter and reducing the service life.
- The small angle caused by the spring deformation of the hand-held soft shaft naturally drooping body body, if it has appeared, indicates that the soft shaft axial spring has been deformed, severely rubbing the pipe wall, causing jitter and reducing the service life.Package Weight: 500.0 G / 17.64 Ounces
Package Dimensions (L*W*H): 250*225*15 MM / 9.84*8.86*0.59 Inches
Retail Packaging: Yes, General Box
Package Include:
1 x Drill Chuck
1 x Flexible Shaft
1 x Chuck Wrench
1 x Small Hex Wrench

#Electric #Grinder #Drill #Special #Chuck #Handle #Flexible #Shaft #Wrench #Polishing #Drilling