CEB-3 Bass Chorus

A CHORUS PEDAL WITH BUILT-IN CROSSOVER
The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. Its the perfect chorus pedal for bassists.

CEB-3  Bass Chorus
Compact chorus pedal especially designed for bass guitar
Applies chorus sound to the high frequencies without altering low frequencies
Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
BOSS five-year warranty
Nominal Input Level : -20 dBu
Input Impedance : 1 M ohm
Nominal Output Level : -20 dBu
Output Impedance : 1 k ohm
Recommended Load Impedance : 10 k ohms or greater
Bypass : Buffered bypass
Controls : DEPTH (Modulation depth) knob , RATE (Modulation rate) knob , LOW FILTER knob , E.LEVEL knob , Pedal switch
Indicator : CHECK indicator (Used for indication of check battery)
Connectors : INPUT jack: 1/4-inch phone type , OUTPUT A (MONO) jack: 1/4-inch phone type , OUTPUT B jack: 1/4-inch phone type , DC IN jack
Power Supply : Alkaline battery (9 V, 6LR61) , AC adaptor (PSA series: sold separately)
Current Draw : 55 mA
Expected battery life under continuous use : Alkaline: Approx. 6 hours   **These figures will vary depending on the actual conditions of use.
Accessories : Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information") , Alkaline battery (9 V, 6LR61)
Options (sold separately) : AC adaptor: PSA series
Width : 73 mm , 2-7/8 inches
Depth : 129 mm , 5-1/8 inches
Height : 59 mm , 2-3/8 inches
Weight(including battery) : 420 g  /15 oz