Welcome to digifounder store：Electronic world, discovering technology, exploring the unknown, growing up,Better fun products, lets share together.
Features:
Brand new and high quality.
The MaxiScan MS309 CAN OBDII/EOBD code reader provides DIYers easy and quick access to diagnostic trouble codes and their definitions on all OBDII compliant vehicles sold worldwide since 1996. Though small in size, it is powerful enough to retrieve the same information as large expensive scanners. It is the best solution to diagnose all 1996 and newer OBDII compliant vehicles!
Specifications:
Retrieves generic and manufacturer specific Diagnostic Trouble Codes (DTC), includes definitions lookup software on CD and displays DTC definitions on screen.
Features a large easy-to-read backlit LCD screen, multilingual menu and DTC definitions and standard 16-pin OBD-II connector; no additional cables are needed.
Views freeze frame data, displays monitor and I/M readiness status, turns off Check Engine Light (MIL), clears codes and resets monitors.
Supports the CAN (Controller Area Network) protols and all other current OBD-II protocols.
Works with all OBD-II compliant U.S., European and Asian vehicles (OBD-II is standard on all cars sold in U.S. post-1996).
Compatible Protocols:
CAN/KWP 2000/ISO 9141-2/J1850 VPW/J1850 PWM.
Supports ISO, VPW and PWM bus systems as well as CANBUS systems.
Support vehicles:
U.S. Models - European - Japanese - Asian - German - Korean.
Suitable for almost all cars after 1996 . GM 96 - now (OBD-II) Ford 96 - now (OBD-II) Chrysler 96 - now (OBD-II) Toyota 96 - now (OBD-II) Honda 96 - now (OBD-II) NISSAN 96 - now (OBD-II) All other - Asian and European 96 - 2012(OBD-II).
Using the Scan Tool Procedures:
Turn the ignition off.
Locate the vehicles 16-pin Data Link Connector(DLC).
Connect the Scan Tool cable connector to the vehicle s DLC. The cable connector is keyed and will only fit one way. (If you have problems connecting the cable connector to the DLC, rotate the connector 180 and try again.
Turn the ignition on. But do not start the engine.
When the Scan Tool cable connector is properly connect to the vehicles DLC, the LCD display shows instructions for select New Scan.
Press the New Scan button. A sequence of message showing the OBD2 protocols will be observed on the display until the vehicle Protocols.
Note:
If the Scan Tool fails to communicate with the vehicles computer, an Unable to establish a link with the vehicle message shows up.
Verify that the ignition is ON.
Check if the Scan Tools OBD2 connector is securely connected to the vehicles DLC.
Verify that the vehicle is OBD2 compliant.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to on and repeat the procedure from the step 6.
Package Included:
1 x MS309 OBD2 Diagnostic Code Scanner Tool
1 x Manual
NO Retail Box. Packed Safely in Bubble Bag.
#MS309 #Fault #Code #Reader #Car #Diagnostic #Scanner #Tool #OBD2 #OBDII #EOBD