Designed to reinforce the sound of instruments on stage, the Audio-Technica PRO 35 is a clip-on microphone that works equally well on sax, toms, brass instruments, and auxiliary percussion. The mic clamps onto your instrument with the supplied AT8418 UniMount clip, which allows for personalized positioning as well as shock protection for the mics capsule.

As this is a cardioid microphone, it will have a fairly isolated sonic capture, minimizing bleed from other instruments on stage and reducing the possibility of feedback. The mic is affixed to a 6 cable and power module. A windscreen is also supplied.

Features

Low Profile: The Pro 35 features an ultralow profile, ideal for use on stage or during broadcasts.

UniMount® Microphone Clip: Permits accurate positioning, provides shock resistance and protects element

Cardioid polar pattern: Reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Wide Frequency Response: Extended frequency response captures subtle nuances of the performance

6 (1.8 m) cable permanently attached to microphone

Specs

Microphone Element: Fixed-charge back plate, permanently polarized condenser
Transducer: Condenser
Polar Pattern: Cardioid
Frequency Response: 50 - 15,000 Hz
Dynamic Range (Typical): 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 64 dB, 1 kHz at 1 Pa
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
Power Requirements: 11 - 52 V, 4 mA typical
Output Impedance: 250 ohms
Output Connectors: XLRM-type (power module)
Pad: No
Low Frequency Roll-Off: 80 Hz, 18 dB/octave
Dimensions: 0.98 x 0.40" / 25 x 10.2 mm
Weight: 0.3 oz / 8 g

Package Weight 0.715 lb
Box Dimensions (LxWxH) 9.6 x 5.2 x 3"
Box Content
Audio-Technica Pro 35 Cardioid Condenser Instrument Microphone
Audio-Technica UniMount Microphone Instrument Mount AT8418
Audio-Technica 2-Stage Foam Windscreen (Small/Black)
Audio-Technica AT8538 Phantom Power Module
Soft Pouch