Kit
Five soldering iron tips kit can meet different basic soldering jobs
Soft grip handle design for maximum comfort and reduced slippage
Easy to use. No need soldering station, just plug and play
Support adjust temperature

Plug Type: US Plug / EU Plug
Material: Plastic(Handle) + Iron
Working Voltage: 220V
Power: 60W
Length: 190mm
Range of Adjustable Temperature: 200°C-450°C

Usage Method:
1. Clean the electronic components to be soldered.
2. Once iron reaches temperature(not too high, recommend 300°C).
3. Apply a little solder to the heated iron tip to prevent oxidation, then rub the iron tip to evenly extend the solder to the surface of the iron tip.
4. Start to solder.

Package Included:

1 X Temperature Adjust Soldering Iron
5 X Soldering Iron Tips
1 X Soldering Iron Holder
1 X Tin Wire Tube: 60/40 0.031 0.50 oz.
1 X Solder Sucker
2 X Tweezers: ESD-10&ESD-15
6 X Double-sided Solder Assist Tool
1 X Screwdriver
1X Set bag


Features:

▶ON/OFF SWITCH- UPGRADED soldering gun come with a ON/OFF switch, you can turn off
by switch when no using, ensure welding safe and energy saving by on/off switch.
▶FAST HEAT UP- 60 watts welding gun can fast heat up within 2 minutes around at low temp,
its upgraded PCBA with better heat chip and internal heating core, high standby efficiently.
▶ADJUSTABLE TEMPERATURE- Adjustable temperatures with LED indicator is 200~450℃ (392℉ to 842℉).
The iron has enough heat to melt solder, connectors can be removed off from circuit boards with the pump.
▶BETTER HEAT-DISSIPATION & RESISTANT- Steel pipe with holes to enhance heat dissipation, cool down
the iron quickly, the thread head stand with high temperature and the silicon rubber handle with anti-skid design.

How to Solder:
1. Prepare solder and soldering iron; Specially, it's necessary to keep the tip clean, which should be coated with solder
2. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly
3. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely
4. Please remove the solder wire when the tin is enough
5. Take away the soldering iron in a direction approximately 45 ° and power off

Caution!!!
- When the sodering iron is plug ged in for first time, there comes out a smoke from the tip end, the smoke
stops in a short while and a smoke never comes out again.
- Use soldering stand and other aids to avoid burnt fingers.
- Don't pull the soldering iron tip outward and use it, it will shorten the heating element life.
- Don't file the long life tip face.
- Don't apply too much solder unnecessarily.