น้ำยาเคลือบกระจกไม่ให้น้ำเกาะ และช่วยป้องกันคราบน้ำ
วิธีการใช้: ทำความสะอาดกระจกให้สะอาด หลังจากเคลือบน้ำยาแล้วให้ทิ้งไว้ 10-15 นาทีถึงเช็ดออก


Maximum Performance = Regular Application to Windshield
Every time you use your windshield wipers, any dirt accumulated on the wiper blades and windshield is subsequently dragged across the windshield. This causes abrasive friction that will, over time, decrease the effectiveness of any glass coating. The simple solution to this problem is to re-apply Pinnacle GlassCoat Window Sealant with Rain Repellent on a regular basis. Those who frequently travel or live in areas where it rains regularly should apply Pinnacle GlassCoat Window Sealant with Rain Repellent monthly. Those who drive less frequently or live in drier climates should apply Pinnacle GlassCoat Window Sealant with Rain Repellent every 3-6 months.

Application Directions
Work on a cool surface in the shade
Glass must be clean, dry and free from any road film or other oily substances. Use Pinnacle Crystal Clear Glass Cleaner with Water Repellent to ensure glass is squeaky clean and ready to coat.
Use a clean, soft foam or microfiber applicator pad. Apply some Pinnacle GlassCoat Window Sealant with Rain Repellent directly onto your applicator pad and then spread and thoroughly work over a section of glass using a circular overlapping motion.
Allow the coating to dry 10 to 15 minutes. Softly wipe any excess product off using a clean, microfiber towel.
For best results, apply two coats to ensure uniform coverage.