Congratulations on your ownership of this effect pedal. Before using the pedal, please carefully read the manual, which offers important information concerning how to properly operate the unit.

A battery is installed in the battery box back side of the pedal, but not connected to the power lines. You can open the battery box, take out the battery and connect the battery to the pedal power lines to test the pedal. The life of the battery may be limited, however, its main purpose is to enable testing.

Main Features

* Low power consumption.

* Ultra low noise operation amplifier inside.

* The effect pedal has got true bypass. When you turn off the pedal, the original sound is perfectly output without any distortion.

Panel Description

AC/DC Adapter Jack

By using an AC adapter, you can play without being concerned about how much battery power you have left.

* Use only the specified AC adapter, and connect it to an AC outlet of the correct voltage.

* If the AC adapter is connected while power is ON, the power supply is automatically from the AC adapter.

* We recommend that you keep batteries installed in the unit even though you power it with the AC adapter. That way, you will be able to continue a performance even if the cord of the AC adapter gets accidently disconnected from the unit.

Depth knob

This adjusts the depth of effect sound. Rotating it clockwise increases the depth, whereas counterclockwise rotation reduces the depth.

Output jack

Connect this jack to your amp or to the input of another effect pedal.

Pedal Switch

This switch turns the effect ON/OFF.

Indicator

This indicator shows whether the effect is ON or OFF. When the effect is ON, the indicator lights.

* If when you power the pedal with a battery and the indicator goes dim or does not light at all by turning ON the effect, the battery is near exhausted and should be replaced.

* The indicator shows only whether the effect is ON or OFF. It does not indicate whether the power to the pedal is ON or not.

Speed knob

This controls the speed of Chorus effect. Rotating the knob clockwise the speed of Chorus will be faster, while rotating it counterclockwise the speed will be slower.

Volume knob

This knob adjusts the volume of the effect sound. Rotating the knob clockwise turn up the volume, while rotating it counterclockwise will turn down the volume.

Input Jack

This jack accepts signals from a guitar or other musical instruments, or another effect pedals.

* The input jack doubles as the power switch. Power to the unit is turned on when you plug into the input jack; the power is turned off when the cable is unplugged. To prevent unnecessary battery consumption, be sure to disconnect the plug from the input jack when not using the effect pedal.

Precautions When Connecting

* To prevent malftion and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

* Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this pedal. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.

* If you will be using the pedal for an extended time, use of an AC adapter is recommended. If you prefer to use a battery, we recommend an alkaline battery.

* Raise the amp volume only after turning on the power to all connected devices.

* Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malftion and/or damage to speakers and other devices.

When powering up: Turn on the power to your guitar amp last.

When powering down: Turn off the power to your guitar amp first.

* When operating on battery power only, the pedal’s indicator will become dim when battery power gets too low. Replace the battery as soon as possible.

Changing the Battery

When the indicator goes dim or no longer lights while the effect is ON, which means that the battery should be replaced. Please replace the battery following the steps below.

1. Press the upper part of battery cover and dig out the cover.

2. Remove the old battery from the battery compartment, and remove the snap cord connected to it.

3. Connect the snap cord to the new battery, and place the battery inside the battery compartment. Be use to carefully observe the battery’s polarity.

4. Put the feet of battery cover into the compartment, and then press the cover upper part and push into the battery compartment.

Specifications

Input Impedance: 100 kohm

Output Impedance: 150 ohm on max Volume

Recommended Load Impedance: 10 kohm

Equival Input Noise: -90 dBu or less

Power Supply: DC 9V - battery or AC adapter

Dimension: 115mm(length)x73mm(width)x48mm(thickness)

Weight including battery:270g

Accessory: Owner’s Manual, Alkaline Battery ( in the battery compartment)

2. You can do payment for your order by Credit Card, Money Booker, Money Gram, Bank T/T, Western Union etc.

1.The ship time depends on the buyers customs clearance time or other factors like weather or the position of the destination.If you have seen the package arrived your place, you can check with the customs or local post office, so you can get the goods soon.

2.The normal delivery time with different express company.

EMS: Estimated delivery time 5-10 work days

China post air mail :Estimated delivery time 15-45 work days

ePacket: Estimated delivery time 5-10 work days,ship to US only

Posti Finland: Estimated delivery time 10-30 work days, ship to n Federation and Belarus only.

AliExpress Standard shipping: Estimated delivery time 15-45 work days

Hong Kong Post Air Mail: Estimated delivery time 15-45 work days

Any other expresses you want , you can contact us.