(1)Capable of accepting all worldwide Coins and Tokens.
(2)Intelligent CPU software control, and high accuracy .
(3)Self-programming without PC.
(4)Accept 1~6 different kinds of coins at the same time.
(5)Free to set up pulses output.
(6)Prevent not only electric shock but also electromagnetic interference.
(7)Automatic self-test for problems.
Specifications
User Guide
The Process of Setup for Parameters
(1)Press the "Add" and "minus" buttons at the same time for about three seconds,then the letter "A" will appear from the LED display.
(2)Press the "setup" button once, and the letter "E" will appear. Next,us the buttons to choose how many kinds of coins you would like to use; then press the"setup" button again to finish.
(3)The letter "H" will appear after pressing the button. Use the "Add" and "minus"buttons to choose how many samples you would like to insert later. Next press the"setup" button again to finish.
(4)The letter "P" will appear after pressing the button. Use the "Add" and "minus" buttons to choose the amount of outputs signals/pulses you want. The quantity limited is 50 times. Next, press the "setup" button to finish.
(5)The letter "F" will appear after pressing the button. Use the "Add" and "minus" buttons to choose accuracy. The value is from 1-30, and 1 is the most accurate. Normally, 5-10 will be fine. Next, press the "setup" button to finish.
(6)So far, you have successfully set up the first coin. please repeat all above procedures until you have set up all the coins. The letter "A" will appear again after all above procedures are finished.
(7)Press the "setup" button,and the letter "E" will appear. Finally,turn off and turn on the power. The setup will be stored.
You can start sampling after the setup is finished. Please choose at least 20 coins. The sampling process will affect the accuracy of coin selector.
Sampling
(1)Press the "setup" button, then letter "A" will appear from the LED display.
(2)Press the "setup" button again, then letter "A1" will appear. Next, start to insert sample coins. The LED display will show how many coins you insert. The letter "A1" will appear again after finished.
(3)Press the "setup" button again, then the letter "A2" will appear. Next, Start to sample 2nd coin, and repeat No. 1 and No. 2 until all the coins are set up .
(4)After finished the sampling, press the "setup" button. The letter "A"will appear, then turn off and turn on the power. Now you can start to use it.
*Newest version of software
*This is used for power supply time control
*Can be used with a coin acceptor or other devices that can output pulse signals.and you can set up for what values to start your machine
*Suitable for any kinds of automatic control devices such as gaming machines, massage chairs, shoe polishers, washing machines, chargers, dryers, and PCs.
Features:
(1) Controls electrical devices ( TV, Massage chair..) power.
(2) Suitable for public place location and most of electric device control,
for example:PCs,washing machines,dryers,massage chairs,chargers,etc.
(3) AC 1250W/DC 500W electrical relay capacity.
(4) Digital timer: rate adjustable by owner through three simple push button switch.
(5) The time can be set by seconds or by minutes.
maximum time : there are 2 version of software
•99:00 (minutes:seconds)or•99:00 (hours:minutes)
(6) Control time by seconds-minutes or minutes-hours.
(7) Accumulate time when signal inputs.
(8) Timer control board with coin acceptor operates with 12V DC power.and has
the LED to show the Time left.
1*JY-16B Timer pcb board
![[🆕BAO1-11--] Multi Coin Acceptor Selector Mechanism Vending Arcade Machine](https://down-th.img.susercontent.com/file/7ce4b112580f0230201272f8d0ddde98_tn)
