HYR-1555Single stage double throw type dry switch. As one kind of magnetic switch, the magnetic spring switchHYR-1555Single stage double throw with first off switch.SPDT) contact. This type of reed switch with1500reach2500 VDCBreakdown voltage, ultra high breakdown voltage type15000 VDC),The length of the glass capsule.1Four5Mm, and50mmThe2lmmFeatures. Dry reed pipeHYR-1555Can be used in equipment, such asCTScannerXX-ray system, etc..
project | parameter |
contact form | IC |
Contact position*1 | O |
Contact material | ruthenium*3 |
Maximum rated power of contact | 3W |
Maximum switching voltage | 100VDC |
Maximum switching current | 0.25A |
Maximum initial contact resistance | 200m. |
Starting value(AT) | 15-50 |
Minimum release value(AT) | 7 |
Minimum cut off voltage*2 | 200VDC |
Maximum contact capacitance | 0.8pF |
Minimum insulation resistance | 109Omega |
Typical resonant frequency | 2.4kHz |
Electrical life (impedance load) | 108(10mVDC, 10 A) |
Characteristic | Single pole double throw switch |
1.C:Center gapO:Off center gap
2.Cut off voltage specification to switch on sensitivity25ATOr higher value based. Sensitivity lower25ATPlease switch to electronic information, union query.HYR4000,HYR5000,HYR9000Series of provisions to the minimumATOn the basis of sensitivity.
3.The rhodium layer is covered with a layer of ruthenium oxide.
4.The platinum layer is covered with a layer of ruthenium oxide.