Size: 2.4 inch
Drive chip: ILI9341
Touch type: without touching
Resolution: 240 * 320
Communication interface: SPI
Interface description:
1. GND (power ground)
2. VCC (power supply is 3.3V)
3. CLK (clock line)
4. MOSI (input data)
5. RES (reset line)
6. DC (data / line selection command)
7. BLK (backlight)
8. MISO (output data)
Brooches description:
If you want to save IO port, BLK backlight may not be connected. The system is designed to illuminate the backlight, even if it is not connected. If you need to turn off the backlight, You need to connect BLK low level or directly to ground.
MISO is the screen output signal. If there is no need to read the screen information, this pin can be disconnected. A minimum of 4 IO ports are required to operate.
Colour: blue
Material: PCB
Size: 30x40mm
Package Contents:
1 * LCD Display Module
