Description: Works with for a Pi2/Pi3 or Pi4 (USB connector positions swapped)
Uses for the Cmedia CM119B or CM108B USB audio IC
Uses for a NiceRF SA818 UHF or VHF embedded radio module
500 to 1000(default) milliwatts RF output power
Small, portable with self contained radio and antenna

Radio settings changed using for a program running on the Raspberry Pi
Required Hardware:
1. A fully assembled SHARI Pi3U, Pi3V, Pi4U or Pi4V.
2. A Raspberry Pi 2, Pi 3 or Pi4 . The Pi2 or Pi3 is normally used with for the SHARI Pi3(U) , while the Pi4 is normally used with the SHARI Pi4(U)
3. A case for the Raspberry Pi. A metal case is preferred but if you want to use a WiFi connection instead of a wired network connection then a plastic case may be required to obtain adequate range.
4. A Mini-SD card - 16GB or larger, Class 10 or better is recommended.
5. A power supply for the Pi-This should be a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies.
Material: aluminum alloy
colour: silver

Package Contents:
1 x Portable Radio Interface